Abstract:The mechanical strengths of silicon wafers are crucial for the manufacturing yield of integrated circuits (ICs), which have received intensive attention over the years. With reducing the feature size of ICs, the mechanical strengths of silicon wafers become more significant. Actually, the gliding of indentation dislocations on single-crystalline silicon wafers at a given temperature reflects the mechanical strengths of silicon wafers. Since the gliding of indentation dislocations is driven by the residual stress around the indentation, the investigation on the correlation between the residual stress and dislocation gliding is of significance. In this paper, we first use micro-Raman microscopy to characterize the relief of stress around the indentation due to the annealling at 300 or 500 ℃. Then the effect of such a relief-stress on the gliding of indentation dislocations at 700-900 ℃ is investigated. In the case without the prior stress-relief, the indentation dislocations glide to the maximum distance after 2 h annealling at 700-900 ℃. With the prior stress-relief due to the annealling at 300 or 500 ℃, the indentation dislocations can still glide to the maximum distance after 2 h annealling at 900 ℃, however the gliding velocity significantly decreases and the gliding distance is remarkably reduced after 2 h annealling at 700 or 800 ℃. Such a reduction of gliding distance is most significant in the case of 700 ℃ annealling following the stress-relief with the 500 ℃/2 h annealling. Despite the prior stress-relief, as long as the annealing time at 700 or 800 ℃ is sufficiently extended, the indentation dislocations can glide to the maximum distance. In view of the above results, it is believed that the maximum gliding distance of indentation dislocations at a given temperature is independent of the values of residual stress around the indentation provided that the residual stresses are larger than the critical stress for driving the dislocation movement. Nevertheless, the annealing time for achieving the maximum gliding distance at a given temperature should be remarkably extended as the residual stresses around the indentation are relieved.

Residual Stress Analysis on Silicon Wafer Surface Layers Induced by Ultra-Precision Grinding

Generation and distribution of residual stress during nano-grinding of monocrystalline silicon

Analysis on Ground Surface Damage of Quartz Fiber-Reinforced Quartz Composites

Studies on the Surface Quality of the Unsteady-State Grinding Technique

Simultaneous double side grinding of silicon wafers: A further investigation into grinding marks pattern

Prediction and Verification Analysis of Grinding Force in the Single Grain Grinding Process of Fused Silica Glass

Observation in the Surface Roughness of Silicon Wafer During Semi-Fixed Abrasive Machining with Large Grains

Ductile deformation and subsurface damage evolution mechanism of silicon wafer induced by ultra-precision grinding process

Subsurface Damage and Bending Strength Analysis for Ultra-Thin and Flexible Silicon Chips

The surface residual stress of monocrystalline silicon in ultrasonic vibration–assisted diamond wire sawing

Investigation on surface generation mechanism of single-crystal silicon in grinding: Surface crystal orientation effect

Effect of grinding damage on cutting force and ductile machining during single grain scratching of monocrystalline silicon

Study of Local Stress Using Stress-Absorbing Si Diaphragm

Analytical modeling of grinding-induced subsurface damage in monocrystalline silicon

Residual Stress Generation in Grinding: Mechanism and Modeling

The material removal and surface generation mechanism in ultra-precision grinding of silicon wafers

Effect of Prior Stress-Relief on the Gliding of Indentation Dislocations on Silicon Wafers

Surface Evolution and Stability Transition of Silicon Wafer Subjected to Nano-Diamond Grinding

Study of Prefabricated Crack Propagation on Monocrystalline Silicon Surfaces for Grinding Damage Analysis

Undeformed Chip Width Non-Uniformity Modeling and Surface Roughness Prediction in Wafer Self-Rotational Grinding Process

Molecular Dynamics Study of Nano-Grinding Behavior for Silicon Wafer Workpieces with Nanoscale Roughness Under Diamond Abrasive Rotation and Translation