Abstract:BaTiO3 thin films were deposited onto a Pt/TiOx/SiO2/Si substrate via the chemical solution deposition method, with LaNiO3 as a buffer layer. Effects of the concentration of precursor solution and LaNiO3 buffer layer on crystallinity and orientation degree of BaTiO3 thin films have been investigated. At 0.2mol/l concentration, X-ray diffraction analyses show that the BaTiO3 films are highly (100)-oriented. The crystalline quality of BaTiO3 is significantly improved with LaNiO3 as a buffer layer. Smooth surface with evenly distributed grains as small as about 80nm were observed by atomic force microscope. The electrical properties of the (100)-oriented films prepared by the one-step chemical solution deposition process have been studied. BaTiO3 thin films with a thickness of about 140nm show a dielectric constant of ∼340 and a loss tangent of ∼2.9%. The BaTiO3 films show a good insulative characteristic against the applied field. The introduction of LaNiO3 buffer layer will decrease the onset of the high current emission of BaTiO3 films. A piezoelectric coefficient of 30pm/V has been detected by the atomic force microscope on the bare film, which is twice as large as that of BaTiO3 thin film with random orientation. These results indicate that the highly (100)-oriented BaTiO3 should be a promising candidate as the lead-free thin film piezoelectrics.

In Situ Preparation of High Quality BaTiO3 Dielectric Films on Si at 350–500 °C

In situ preparation of high dielectric constant, low-loss ferroelectric BaTiO3 films on Si at 500°C

In Situ Preparation Of High Dielectric Constant, Low-Loss Ferroelectric Batio3 Films On Si At 500 Degrees C

Low-temperature deposition of (110)-oriented barium titanate thin films and their electrical properties

Electrical properties and crystal structure of (Ba,Sr)TiO3 films prepared at low temperatures on a LaNiO3 electrode by radio-frequency magnetron sputtering

Low-temperature Crystallization of High Performance Pb0.4Sr0.6TiO3 Films Compatible with the Current Silicon-Based Microelectronic Technology

A simple, low-temperature fabrication method of highly (100)-oriented (Na0.85K0.15)0.5Bi0.5TiO3 thin films with outstanding electric properties

Enhanced Dielectric Properties of Low-Temperature-sintered Ba 0.6 Sr 0.4 TiO 3 Thick Films

Low-temperature synthesis of barium titanate thin films by nanoparticles electrophoretic deposition

Structure and Dielectric Properties of Barium Titanate Thin Films for Capacitor Applications

Hydrothermal preparation of BaTiO3 thin film on silicon

Dielectric and piezoelectric properties of highly (100)-oriented BaTiO3 thin film grown on a Pt/TiOx/SiO2/Si substrate using LaNiO3 as a buffer layer

Spin-coated BiFeO3 Films on Si Wafers: Low Processing Temperature but Prominent Piezoelectricity

Temperature-stable dielectric properties from −45 °C to 250 °C in the system BaTiO3-(Bi0.5Na0.5)TiO3-Bi(Mg0.5Zr0.5)O3-Ba(Fe0.5Nb0.5)O3

Low-temperature Preparation of BaTiO 3 Thin Film by MOD and Hydrothermal Treatment

Low Temperature Deposition of High Performance Lead Strontium Titanate Thin Films by in Situ RF Magnetron Sputtering

Enhanced Tunability Performance of Low Temperature Crystallized Pb0.4sr0.6tio3 Thin Films Derived from Distinct Microstructure

Dielectric and piezoelectric properties of highly (1 0 0)-oriented BaTiO3 thin film grown on a Pt/TiOx/SiO2/Si substrate using LaNiO3 as a buffer layer

Dielectric and Ferroelectric Properties of Highly (100)-Oriented (na0.5bi0.5)0.94ba0.06tio3 Thin Films Grown on LaNiO3/γ-Al2O3/Si Substrates by Chemical Solution Deposition

Low Temperature Growth of Epitaxial Ferroelectric BaTiO3

High Tunable Ba<SUB Align="right">0.5sr<sub Align="right">0.5tio<sub Align="right">3 Thin Film Deposited on Silicon Substrate with MgO Buffer Layer