Abstract:Amorphous indium-gallium-zinc oxide (a-IGZO) has become a standard channel ingredient of switching/driving transistors in active-matrix organic light-emitting diode (AMOLED) televisions. However, mobile AMOLED displays with a high pixel density (≥500 pixels per inch) and good form factor do not often employ a-IGZO transistors due to their modest mobility (10-20 cm2/(V s)). Hybrid low-temperature polycrystalline silicon and oxide transistor (LTPO) technology is being adapted in high-end mobile AMOLED devices due to its ultralow power consumption and excellent current drivability. The critical issues of LTPO (including a complicated structure and high fabrication costs) require a search for alternative all-oxide thin-film transistors (TFTs) with low-cost processability and simple device architecture. The atomic layer deposition (ALD) method is a promising route for high-performance all-oxide TFTs due to its unique features, such as in situ cation composition tailoring ability, precise nanoscale thickness controllability, and excellent step coverage. Here, we report an in-depth comparative investigation of TFTs with indium-gallium oxide (IGO)/gallium-zinc oxide (GZO) and indium-zinc oxide (IZO)/GZO heterojunction stacks using an ALD method. IGO and IZO layers with different compositions were tested as a confinement layer (CL), whereas the GZO layer was used as a barrier layer (BL). Optimal IGO/GZO and IZO/GZO channels were carefully designed on the basis of their energy band properties, where the formation of a quasi-two-dimensional electron gas (q2DEG) near the CL/BL interface is realized by rational design of the band gaps and work-functions of the IGO, IZO, and GZO thin films. To verify the effect of q2DEG formation, the device performances and stabilities of TFTs with CL/BL oxide heterojunction stacks were examined and compared to those of TFTs with a single CL layer. The optimized device with the In0.75Zn0.25O/Ga0.80Zn0.20O stack showed remarkable electrical performance: μFE of 76.7 ± 0.51 cm2/(V s), VTH of -0.37 ± 0.19 V, SS of 0.13 ± 0.01 V/dec, and ION/OFF of 2.5 × 1010 with low operation voltage range of ≥2 V and excellent stabilities (ΔVTH of +0.35, -0.67, and +0.08 V for PBTS, NBIS, and CCS, respectively). This study suggests the feasibility of using high-performance ALD-derived oxide TFTs (which can compete with the performance of LTPO transistors) for high-end mobile AMOLED displays.

A Back-Channel-Etched Amorphous InGaZnO Thin-Film Transistor Technology with Al-Doped ZnO As Source/Drain and Pixel Electrodes

Thin Film Transistor Using Amorphous InGaZnO Films as Both Channel and Source/Drain Electrodes

Nb Doped TiO2Protected Back-Channel-Etched Amorphous InGaZnO Thin Film Transistors

P-15: AZO Etch Buffer Layer Based Back-Channel-Etch A-Igzo TFT Technology

Back Channel Anodization Amorphous Indium Gallium Zinc Oxide Thin-Film Transistors Process

Fabrication and Properties of InGaZnO Thin-Film Transistors Based on a Sol–Gel Method with Different Electrode Patterns

Back-End-of-Line-Compatible Scaled InGaZnO Transistors by Atomic Layer Deposition

A Bottom-Gate Indium-Gallium-Zinc Oxide Thin-Film Transistor With an Inherent Etch-Stop and Annealing-Induced Source and Drain Regions

Highly Stable, High Mobility Al:SnZnInO Back-Channel Etch Thin-Film Transistor Fabricated Using PAN-Based Wet Etchant for Source and Drain Patterning

Performance Enhancement of Channel-Engineered Al-Zn-Sn-O Thin-Film Transistors with Highly Conductive In-Ga-Zn-O Buried Layer via Vacuum Rapid Thermal Annealing

Implementation of sub-100 nm vertical channel-all-around (CAA) thin-film transistor using thermal atomic layer deposited IGZO channel

Fabrication of Amorphous Igzo Thin Film Transistor for Active-Driving of Zno Nanowire Field Emitters

Deep Sub-Micron Self-Aligned Bottom-Gate Amorphous InGaZnO Thin-Film Transistors With Low-Resistance Source/Drain

High‐Performance Back‐Channel‐Etched Thin‐Film Transistors with an InGaO/InZnO Stacked Channel

Effect of passivation layer on back channel etching InGaZnO thin film transistors

High-Performance Amorphous InGaZnO Thin-Film Transistor Gated by HfAlOₓ Dielectric with Ultralow Subthreshold Swing

High-Performance of InGaZnO TFTs With an Ultrathin 5-nm Al₂O₃ Gate Dielectric Enabled by a Novel Atomic Layer Deposition Method

High-Performance of InGaZnO TFTs With an Ultrathin 5-nm Al2O3 Gate Dielectric Enabled by a Novel Atomic Layer Deposition Method

Self-aligned Top-Gate Amorphous Oxide Thin-Film Transistors with IZO/IGZO Stacked Active Layer and Al Reacted Source/drain Region

High-Performance Fully Thermal ALD-Processed IGZO Thin Film Transistors

Comparative Study of Atomic Layer Deposited Indium-Based Oxide Transistors with a Fermi Energy Level-Engineered Heterojunction Structure Channel through a Cation Combinatorial Approach