Abstract:The elastic properties of 1D nanostructures such as nanowires are often measured experimentally through actuation of the nanowire at its resonance frequency, and then relating the resonance frequency to the elastic stiffness using elementary beam theory. In the present work, we utilize large scale molecular dynamics simulations to report a novel beat phenomenon in [110] oriented Ag nanowires. The beat phenomenon is found to arise from the asymmetry of the lattice spacing in the orthogonal elementary directions of the [110] nanowire,i.e., [-110] and [001] directions, which results in two different principal moments of inertia. Because of this, actuations imposed along any other direction are found to decompose into two orthogonal vibrational components based on the actuation angle relative to these two elementary directions, with this phenomenon being generalizable to <110> FCC nanowires of different materials (Cu, Au, Ni, Pd and Pt).The beat phenomenon is explained using a discrete moment of inertia model based on the hard sphere assumption, the model is utilized to show that surface effects enhance the beat phenomenon, while the effect is reduced with increasing nanowires cross-sectional size or aspect ratio.Most importantly, due to the existence of the beat phenomena, we demonstrate that in resonance experiments only a single frequency component is expected to be observed, particularly when the damping ratio is relatively large or very small.Furthermore, for a large range of actuation angles, the lower frequency is more likely to be detected than the higher one,which implies the experimental predictions of Young's modulus obtained from resonance may in fact be under predictions. The present study therefore has significant implications for experimental interpretations of Young's modulus as obtained via resonance testing.

In Situ Characterization of the Local Work Function along Individual Free Standing Nanowire by Electrostatic Deflection

In-Situ Study of Surface Work Function, Electrical Characteristic and Field Emission Property of Individual Zno Nanowire

General Existence of Flexural Mode Doublets in Nanowires Targeting Vectorial Sensing Applications

In Situ Observation of High Bending Strain Recoverability in Au Nanowires

In situ nanomechanical measurement of Cu nanowires

Beat Phenomena in Metal Nanowires, and Their Implications for Resonance-Based Elastic Property Measurements.

In Situ Atomistic Observation of the Deformation Mechanism of Au Nanowires with Twin–twin Intersection

Current-voltage Characteristics and Parameter Retrieval of Semiconducting Nanowires

Non-contact Local Conductivity Measurement of Metallic Nanowires Based on Semi-Near-field Reflection of Microwave Atomic Force Microscopy

In situ electron microscopy four-point electromechanical characterization of freestanding metallic and semiconducting nanowires

Methodology for Measurement of Submicron Metallic Wire's Local Electrical Conductivity by Applying Four-points AFM Probe Technique

Probe the Effects of Surface Adsorbates on Zno Nanowire Conductivity Using Dielectric Force Microscopy

In-Situ Determination of the Flat Band Carrier Concentration and Surface Charge Density of Individual Semiconductor Nanowires by A Combination of Electrical and Field Emission Measurements

J212015 Quantitative Evaluation of Conductivity of Metallic Nanowires by Microwave Atomic Force Microscopy

In Situ Probing Electrical Response on Bending of ZnO Nanowires Inside Transmission Electron Microscope

NOVEL AFM PROBE FOR LOCAL CONDUCTIVITY MEASUREMENT

Characterization of Electrical Properties of Suspended ZnO Nanowires Using a Nanorobotic Manipulation System Inside a Scanning Electron Microscope for Nanoelectronic Applications

Measuring the Electrical Characteristics of Individual Junctions in the SnO2 Capped ZnO Nanowire Arrays on Zn Substrate

Mechanical/Electrical Characterization of ZnO Nanomaterial Based on AFM/Nanomanipulator Embedded in SEM

Contactless Characterization of Electronic Properties of Nanomaterials Using Dielectric Force Microscopy

Local work function on graphene nanoribbons