Abstract:An electromechanically-coupled micro-contact resistance measurement system is built to mimic the contact process during fatigue testing of nanoscale-thickness interconnects using multiple probe methods. The design combines an optical microscope, high-resolution electronic balance, and micromanipulator-controlled electric probe, and is coupled with electrical measurements to investigate microscale contact physics. Experimental measurements are performed to characterize the contact resistance response of the gold nanocrystalline pad of a 35-nm-thick interconnect under mechanical force applied by a tungsten electrode probe. Location of a stable region for the contact resistance and the critical contact force provides better understanding of micro-contact behavior relative to the effects of the contact force and the nature of the contact surface. Increasing contact temperature leads to reduced contact resistance, softens the pad material, and modifies the contact surface. The stability of both contact resistance and interconnect resistance is studied under increasing contact force. Major fluctuations emerge when the contact force is less than the critical contact force, which shows that temporal contact resistance will affect interconnect resistance measurement accuracy, even when using the four-wire method. This performance is demonstrated experimentally by heating the Au line locally with a laser beam. Finally, the contact resistances are calculated using the LET (Li–Etsion–Talke) model together with combined Holm and Sharvin theory under various contact forces. Good agreement between the results is obtained. This research provides a way to measure change in interconnect line resistance directly under a stable contact resistance regime with a two-wire method that will greatly reduce the experimental costs.

Measurement Of Mwcnt/Tungsten Contact Resistance By Bridging Cnt On Two Tungsten Electrodes With Two Manipulators

Characterization of the Resistance and Force of a Carbon Nanotube/Metal Side Contact by Nanomanipulation

Contact Characterization Between Multi-Walled Carbon Nanotubes And Metal Electrodes

Dual-MWCNT Probe Thermal Sensor Assembly and Evaluation Based on Nanorobotic Manipulation Inside a Field-Emission-Scanning Electron Microscope

Precise Assembly and Electrical Contact of MWCNT Based on AC Dielectrophoresis and Robotic Nanomanipulation Technology

Establishing Ohmic Contact of a Radial Compressed CNT Bundle with High Work Function Metal

Characterization of Micro-Contact Resistance Between A Gold Nanocrystalline Line and A Tungsten Electrode Probe in Interconnect Fatigue Testing

Benchmarking of Metal-to-Carbon Nanotube Side Contact Resistance

The effect of the geometry and material properties of a carbon joint produced by electron beam induced deposition on the electrical resistance of a multiwalled carbon nanotube-to-metal contact interface

Measuring the electrical resistivity and contact resistance of vertical carbon nanotube bundles for application as interconnects

Electron Holographic Study of the Effect of Contact Resistance of Connected Nanowires on Resistivity Measurement

CNT Handling with Van Der Waals Force Inside a SEM for FET Application.

Assembly of a CNT-FET Based on Nanorobotic Manipulation System Inside a SEM

Contact Resistances of Carbon Nanotube Via Interconnects

Cooperative Carbon Nanotube Nanomanipulation for Field Effect Transistor.

Electron Beam Irradiation Induced Multiwalled Carbon Nanotubes Fusion Inside SEM

Robust Ohmic contact junctions between metallic tips and multiwalled carbon nanotubes for scanned probe microscopy

A Study On The Assembly Method Of Single Carbon Nanotube Based On Nanomanipulation Robot

Force Analysis Of Top-Down Forming Cnt Electrical Connection Using Nanomanipulation Robot

Electrical Conductivity of Multiwall Carbon Nanotube Bundles Contacting with Metal Electrodes by Nano Manipulators inside SEM

Establishing Ohmic contacts for in situ current-voltage characteristic measurements on a carbon nanotube inside the scanning electron microscope.