Abstract:Author(s): Guo, Zheng | Advisor(s): Nikolic, Borivoje | Abstract: Continued increase in the process variability is perceived to be a major roadblock for future technology scaling. Its impact is particularly pronounced in large memory arrays due to both the utilization of minimum sized transistors and their extremely large data capacity. In order to enable the continued scaling of the next-generation embedded SRAM, the ability to monitor and characterize, on-chip, the variations in SRAM functionality and performance becomes critical for both gaining a deeper understanding of the sources of variability and for developing more robust circuits and topologies. This work presents a methodology to characterize, directly, the impact of process variability on the functionality of large SRAM-based cache memories - capable of collecting massive silicon data at little hardware and/or design overhead. In addition, a thorough investigation of various SRAM read stability and writeability metrics, including the proposed large-scale design metrics, is conducted to further understand the utility of each metric for SRAM yield prediction. The large-scale characterization methodology is validated on two different test chips, fabricated in an early commercial low-power 45nm CMOS process. This method can be easily extended to capture more than 6 standard deviations of parameter variations by increasing the SRAM array size, and therefore can serve as a valuable addition to the next-generation SRAM development vehicle.The enablement of future SRAM scaling will require technology and circuit co-design. The FinFET technology is particularly attractive for nanoscale SRAM design not only for its reduced σVTH and better control of the short channel effects (SCE), but also for the architectural flexibility enabled by its unique independently-gated (IG) operation. New bitcell designs are presented to take advantage of this IG operation in the form of a dynamic pass-gate feedback (PGFB). It is shown that the IG FinFET design using dynamic PGFB can both dramatically enhance the read stability of a 6-T SRAM cell and enable the practical design of a 4-T SRAM cell. While increased variability presents a formidable challenge for future SRAM scaling, the presented methodologies, both in testing and design, can facilitate its continuation.

17.3 A Reconfigurable Dual-Port Memory with Error Detection and Correction in 28nm FDSOI.

Ultrafast Self-Rectifying Memristors for Advanced In-Memory Computing

A Dual Core Oxide 8T SRAM Cell with Low Vccmin and Dual Voltage Supplies in 45nm Triple Gate Oxide and Multi Vt CMOS for Very High Performance Yet Low Leakage Mobile SoC Applications

13.2 A 14nm FinFET 128Mb 6T SRAM with VMIN-enhancement techniques for low-power applications

An Ultra-Low-Voltage Bit-Interleaved Synthesizable 13T SRAM Circuit.

An Ultra-Dynamic Voltage Scalable (U-DVS) SRAM Design

A 2mb Reram with Two Bits Error Correction Codes Circuit for High Reliability Application

A Monolithic-3D SRAM Design with Enhanced Robustness and In-Memory Computation Support

A 1.041-Mb/mm 2 27.38-TOPS/W Signed-INT8 Dynamic-Logic-Based ADC-less SRAM Compute-in-Memory Macro in 28nm with Reconfigurable Bitwise Operation for AI and Embedded Applications

An Error-Free 64KB ReRAM-Based Nvsram Integrated to a Microcontroller Unit Supporting Real-Time Program Storage and Restoration

A 28-Nm Compute SRAM with Bit-Serial Logic/Arithmetic Operations for Programmable In-Memory Vector Computing

Radiation-Hardened 0.3–0.9-V Voltage-Scalable 14T SRAM and Peripheral Circuit in 28-Nm Technology for Space Applications

SRAM Cell Design Challenges in Modern Deep Sub-Micron Technologies: An Overview

A 1-Mb Programming Configurable ReRAM Fully Integrating into a 32-Bit Microcontroller Unit.

A Novel Page-Forming Scheme with Ultra-Low Bit-Error-Rate and High Reliability on a 1mb RRAM Chip

A 0.2 V-1.8 V 8T SRAM with Bit-interleaving Capability.

A 0.13 µm 8 Mb Logic-Based Cu Si O ReRAM With Self-Adaptive Operation for Yield Enhancement and Power Reduction

A Low-Power Variation-Tolerant 7T SRAM With Enhanced Read Sensing Margin for Voltage Scaling

14.2 A Compute SRAM with Bit-Serial Integer/Floating-Point Operations for Programmable In-Memory Vector Acceleration

Large-Scale Variability Characterization and Robust Design Techniques for Nanoscale SRAM

S2RAM: Optimization of SRAM With Memory Access Patterns