Abstract:The resistive random access memory (RRAM), based on the reversible switching between different resistance states, is a promising candidate for next-generation nonvolatile memories. One of the most important challenges to foster the practical application of RRAM is the control of the statistical variation of switching parameters to gain low variability and high reliability. In this work, starting from the well-known percolation model of dielectric breakdown (BD), we establish a framework of analysis and modeling of the resistive switching statistics in RRAM devices, which are based on the formation and disconnection of a conducting filament (CF). One key aspect of our proposal is the relation between the CF resistance and the switching statistics. Hence, establishing the correlation between SET and RESET switching variables and the initial resistance of the device in the OFF and ON states, respectively, is a fundamental issue. Our modeling approach to the switching statistics is fully analytical and contains two main elements: (i) a geometrical cell-based description of the CF and (ii) a deterministic model for the switching dynamics. Both ingredients might be slightly different for the SET and RESET processes, for the type of switching (bipolar or unipolar), and for the kind of considered resistive structure (oxide-based, conductive bridge, etc.). However, the basic structure of our approach is thought to be useful for all the cases and should provide a framework for the physics-based understanding of the switching mechanisms and the associated statistics, for the trustful estimation of RRAM performance, and for the successful forecast of reliability. As a first application example, we start by considering the case of the RESET statistics of NiO-based RRAM structures. In particular, we statistically analyze the RESET transitions of a statistically significant number of switching cycles of Pt/NiO/W devices. In the RESET transition, the ON-state resistance (RON) is a key parameter to describe the initial state of the CF. Hence, we subdivide the statistical samples (obtained mainly in a single device) in several RON ranges so as to study the switching statistics as a function of RON. In this regard, we have found that the experimental data can be nicely fit to a Weibull model in all the resistance ranges. Moreover, the distributions significantly change with RON. This change might be even more significant than the device-to-device related variations and, hence, mostly determine the overall statistics of switching parameters. In particular, we have found that the Weibull slopes of both VRESET, IRESET, and PRESET cumulative distributions increase linearly with 1/RON, i.e., they increase with the area of the CF. On the other hand, while the scale factor of the VRESET distribution (V63%) is roughly independent of RON, the scale factor of the distribution of IRESET and PRESET (I63% and P63%) linearly increases with 1/RON. Upon a direct analogy with the cell-based analytical percolation model of oxide BD, two simple geometrical cell-based models, the single path model with variable width and the multiple parallel path model, are proposed to address the RESET statistics. In the limit where these two geometrical models coincide, we incorporate a deterministic model for the RESET switching dynamics based on the self-accelerated thermal dissolution of the CF. With these two ingredients, the complete physics-based model for the RESET statistics is constructed. This analytical model is shown to nicely account for the experimental results with remarkable agreement.

Four point probe ramped voltage stress as an efficient method to understand breakdown of STT-MRAM MgO tunnel junctions

Statistical nature of hard breakdown recovery in high-κ dielectric stacks studied using ramped voltage stress.

Probing Write Error Rate and Random Telegraph Noise of MgO Based Magnetic Tunnel Juction Using a High Throughput Characterization System

Identify the Critical Regions and Switching/Failure Mechanisms in Non-Filamentary Rram (A-Vmco) by Rtn and Cvs Techniques for Memory Window Improvement

Using Post-Breakdown Conduction Study in a MIS Structure to Better Understand the Resistive Switching Mechanism in an MIM Stack

RTN based oxygen vacancy probing method for Ox-RRAM reliability characterization and its application in tail bits

Survey on STT-MRAM Testing: Failure Mechanisms, Fault Models, and Tests

A VDD Correction Method for Static Stability Test of SRAM Bit Cell

Investigation of PVT-Aware STT-MRAM Sensing Circuits for Low-VDD Scenario

Investigation of Preexisting and Generated Defects in Nonfilamentary A-Si/tio2 RRAM and Their Impacts on RTN Amplitude Distribution

Accurate and Fast STT-MRAM Endurance Evaluation Using a Novel Metric for Asymmetric Bipolar Stress and Deep Learning.

Device and Circuit Interaction Analysis of Stochastic Behaviors in Cross-Point RRAM Arrays

Sneak-path Based Test and Diagnosis for 1R RRAM Crossbar Using Voltage Bias Technique

A Study of Write Margin of Spin Torque Transfer Magnetic Random Access Memory Technology

An overview of the switching parameter variation of RRAM

Total Dose and Single Event Effects on 16 Mbit Standalone Spin-Transfer Torque MRAM with 45 nm CMOS Technology

Methodology for Stability Evaluation on the Multi-Level Storages of Oxide-Based Conductive Bridge Ram (Cbram)

An analytical approach to engineer multistability in the oscillatory response of a pulse-driven ReRAM

Study on High-Resistance State Instability of TaOx-Based RRAM

A Reference-less Slope Detection Technique in 65nm for Robust Sensing of 1T1R Arrays

Analysis and Modeling of Resistive Switching Statistics