Abstract:Reliability is essential for large-scale applications of high-power light-emitting diode (LED) devices, modules, and systems for general illumination. In this paper, the reliability of a novel application-specific LED package (ASLP) is investigated by thermal shock testing, failure analysis, and fluid-solid coupling thermo-mechanical simulation. The reliability of the ASLP modules was validated with a dual-bath liquid thermal shock testing from 233 to 398 K. The non-destructive failure analysis was conducted to the catastrophic failure ASLP samples by fluorescent penetrant inspection. The delaminations at the interfaces within the ASLP module were detected. The failure mechanisms were identified by digital optical microscopy and field emission scanning electron microscope inspection after the decapsulation. The experimental results show that fracture failure occurs at the wedge joint of the bonding wire, which leads to the catastrophic failure of the ASLP module. The stress and strain behaviors of the ASLP module, especially the bonding wire under thermal shock loading, were analyzed through thermo-mechanical modeling with the nonlinear time- and temperature-dependent material properties. Significant thermal gradient within the ASLP module during the thermal shock testing was taken into consideration by the fluid-solid coupling transient thermal transfer analysis. The effects of the delaminations detected by the fluorescent penetrant inspection on the reliability of the bonding wire were also examined. It is found the delaminations existing at the interfaces within the ASLP module induce significant plastic strain to the wedge joint and results in fracture failure. The results from the numerical simulation can make a good prediction of the failure mechanism of the ASLP modules under thermal shock loading.

Failure-mechanism analysis for vertical high-power LEDs under external pressure

Influence of Lens Structure on the Mechanical Strength of High-Power Light Emitting Diodes

Study On Solder Bonding Technology And Its Failure Mechanism

Failure Analysis Techniques for High Power Light Emitting Diodes

Fatigue failure modeling of wire bonds of high power LED packages with a multiphysics simulation method

Failure Analysis Of Die-Bonding Interfaces Between Led Chip And Heat Sink

Reliability Test and Failure Analysis of High Power LED Packages

Study on the Reliability of Application-Specific LED Package by Thermal Shock Testing, Failure Analysis, and Fluid–Solid Coupling Thermo-Mechanical Simulation

Drop Impact Simulation and Experimental Validation on High Power Light Emitting Diodes Modules

Effects of Defects on the Thermal and Optical Performance of High-Brightness Light-Emitting Diodes

Study on LED Failure Analysis Method Based on Electronic Device Failure Analysis Theory

Effect mechanism of moisture diffusion on LED reliability

Life Test and Failure Mechanism Analyses for High-power LED

Fluid–solid Coupling Thermo-Mechanical Analysis of High Power LED Package During Thermal Shock Testing

Effect Study of Silicone Amount on the Lumen Maintenance of High Power Led under Accelerated Stress Test

Comparison of LED Package Reliability under Thermal Cycling and Thermal Shock Conditions by Experimental Testing and Finite Element Simulation

Void Formation and Growth at Solder-Bonded Interfaces in HP LEDs

Drop impact test on high power light emitting diodes module

Reconstruction and Thermal Performance Analysis of Die-Bonding Filling States for High-Power Light-Emitting Diode Devices

Fatigue life evaluation of wire bonds in LED packages using numerical analysis

Bond Wire Fatigue of Au, Cu, and PCC in Power LED Packages