Abstract:With the introduction of lead-free solder alloys, the effect of voids on solder joint reliability has rapidly gained importance. In this study, a first analysis of X-rayed CR0805 solder joints shows a significant reduction in void content, from 20% down to 2.5%, after vacuum soldering. The statistical analysis of the void distribution demonstrates that the vacuum option reduces number of voids and median diameter of voids in comparison to the convection soldering process. A subsequent accelerated thermal cycling test of these analysed test vehicles, according to JESD22-A104D, indicates the tendency of a higher characteristic life time for higher void content. In contrast to these findings, the 1% to failure criterion reveals a higher reliability for lower voiding. During the finite element method (FEM) modelling part of this study, two modelling approaches of void implementation into solder joint geometry are investigated: modelling with a constant volume of the standoff for different void contents, and a modelling approach with a random combination of void content and volume of standoff. The modelling approach with the random combination reveals that voids can reduce the lifetime in the “worst case” parameter combination. In particular, the 1% time to failure rate indicates a quantitative correlation with the experimental results. Furthermore, the FEM results suggest a higher impact on reliability for a single void in comparison to a distribution of multiple voids with similar void content. Finally, the FEM study shows a high sensitivity of predicted life time with respect to the standoff height. Based on this finding, the CR0805 solder joint geometry is examined using optical inspection and cross-section polishes with the outcome that the better wetting behaviour during vacuum soldering causes a reduction of the solder alloy volume and consequently further decreases the standoff height.

Void Formation and Growth at Solder-Bonded Interfaces in HP LEDs

Failure Analysis Of Die-Bonding Interfaces Between Led Chip And Heat Sink

Analysis of thermal spreading resistance in high power LED package and its design optimization

Improvement of high-power LED performance with sintered chip attachment

Experimental Study of Void Formation in High-Lead Solder Joints of Flip-Chip Assemblies

Improved Thermal Performance of High-Power Led by Using Low-Temperature Sintered Chip Attachment

Research on the reliability of Micro LED high-density solder joints under thermal cycling conditions

Reliability test and failure analysis of high-brightness LEDs from Cree under the various injection currents

Thermal Management for Microscale Inorganic Light-Emitting Diodes

Experimental and multiphysics simulation study of atoms migration and morphology evolution in solder joints under high current density

Effects of Bonding Materials on Optical–Thermal Performances and High-Temperature Reliability of High-Power LED

Junction temperature and reliability of high-power flip-chip light emitting diodes

Temperatures and Thermal Stresses in High-Power Light Emitting Diodes

The Two-Phase Flow Simulation and Experimental Research on the Formation of Solder Voids in Power Module

Effect of voids on thermo-mechanical reliability of chip resistor solder joints: Experiment, modelling and simulation

Study on collaborative enhancement of led heat dissipation characteristics by pulsating heat pipe and heat pipe

Analysis of Junction Temperatures in High-Power GaN-based LEDs

Thermal improvement of die attach by using PDMS-grafted particles as filler and Its application in solid state lighting

Fatigue Damage Assessment of LED Chip Scale Packages with Finite Element Simulation

Heat Dissipation Enhancement of High-Power LEDs Through Compact Ceramic Substrate Integrated With Microchannel

Experimental Study of Void Formation in Eutectic and Lead-Free Solder Bumps of Flip-Chip Assemblies