Properties of Alumina Green Parts via Selective Laser Sintering Combined with Cold Isostatic Pressing

kai liu,chen hui li,wen ting he,y s shi

DOI: https://doi.org/10.4028/www.scientific.net/AMM.325-326.83

2013-01-01

Applied Mechanics and Materials

Abstract:To obtain complex shape alumina ceramic parts, a composite powder of epoxy resin binder E-06 and alumina powder were laser sintered combined with cold isostatic pressing (CIP). Experiments on selective laser sintering (SLS) and CIP were carried out to probe the influencing factors in the processes of forming alumina green parts. When laser power, scan speed, scan spacing and layer thickness were, respectively, 21 w, 1800 mm/s, 100 μm and 150 μm, the density and bending strength of alumina parts were relatively high. Following that, we experimented on different CIP maximum pressure which had different effects on densification of SLS alumina parts, the whole process in CIP was divided into two stages of I and II. Finally, the optimized SLS/CIP alumina parts were degreased and then sintered in 1600 °C for 2 h to produce crack-free alumina parts.