Abstract:Digital light processing (DLP) is a promising additive manufacturing method for creating complex structural alumina ceramic with high precision, high efficiency, and low cost. However, printing large-size parts with high feature resolution by DLP, obtaining high-performance pastes, and optimizing the debinding process are challenges that still need to be overcome. In this study, an advanced top-down Matrix-DLP technology that seamlessly connects two high-definition-resolution DLP projectors, with high resolution and a large projection area, was used to achieve fine-structured large-size alumina green bodies. The homogeneous and stable non-self-levelling alumina pastes suitable for the DLP technology were developed, with a high solid loading up to 55 vol%, viscosity of 35.0 Pa s at 30 s−1, and good rheological properties by innovatively using 2.5 wt% P5318 as surface modifiers of alumina powders and with only a 0.244% volume of bubble residue by using 0.5 wt% BYK-066N defoamer in combination with a vacuum planetary stirring defoaming process. The debinding processes were designed based on TG-DSC analysis and then optimized, and it was proved that the segmented-atmosphere debinding process was the best approach and can obtain defect- and carbon residue-free bodies with uniform grain distribution, and can also achieve non-destructive debinding for the thick-walled parts with thickness greater than 10 mm. The effects of the debinding residual carbon and the solid loading on the microstructure and properties after sintering were also investigated. Consequently, the high-precision large-size alumina ceramic with good interlayer bonding, dense microstructure, and high microhardness of 17.92 GPa was obtained.

Solid freeform fabrication of alumina ceramic parts through a lost mould method

RAPID PROTOTYPING OF COMPLEX-SHAPED Al2O3 CERAMICS BY A LOST MOULD METHORD

Gelcasting Based Solid Freeform Fabrication of Piezoelectric Ceramic Objects

Fabrication of complicated ceramic parts by gelcasting based on additive manufactured acetone-soluble plastic mold

New Laser Machining Technology of Al2O3 Ceramic with Complex Shape

Ceramics with Ultra‐Low Density Fabricated by Gelcasting: an Unconventional View

Alumina casting based on gelation of gelatine

Rapid Prototyping of Piezoelectric Ceramics Via Selective Laser Sintering and Gelcasting

The New Methods And Techniques Based On Gel-Casting

Alumina-based ceramic mold with integral core and shell for hollow turbine blades fabricated by Laser powder bed fusion

Ceramics with Special Porous Structures Fabricated by Freeze-Gelcasting: Using tert-Butyl Alcohol as a Template

New gel-casting process for alumina ceramics based on gelation of alginate

Preparation of porous ceramics by gelcasting approach

Directly fabricated Al2O3/GdAlO3 eutectic ceramic with large smooth surface by selective laser melting: Rapid solidification behavior and thermal field simulation

Material extrusion for ceramic additive manufacturing with polymer-free ceramic precursor binder

Gel-casting Without De-Airing Process Using Silica Sol As a Binder

GELCASTING OF ALUMINA SLURRY DISPERSED IN SILICA SOL WITHOUT DE-AIRING PROCESS

Fabrication and properties of alumina ceramics shaped by digital light processing as an additive manufacturing technology

Fabrication of Porous Alumina Ceramics with Directional Pore Channels Structure by Freeze-Gel Casting Processing

Preparation of large-size alumina ceramic parts by DLP 3D printing using high-solid-loading paste and optimizing the debinding process

Ceramic in-situ forming based on gelation of sodium alginate