Abstract:Conjugate heat transfer numerical simulation of a transonic internal cooled turbine vane is carried out with a third-order accuracy TVD (Total Variation Diminishing) scheme and multi-block structured grids using the code developed in this paper. Comparison between results of commercial CFD codes with several turbulence models and those of this code show that it is incorrect of computational codes to predict the thermal boundary layer with traditional turbulence models, and that the turbulence models considering transitional phenomenon is able to acquire better accurate heat transfer in thermal boundary layer despite of certain deficiencies yet. The predicted distributions of aerodynamic parameters agree well with the experiments except for the temperature and heat transfer coefficient over the profile surface, which are largely different from the measured data. Results by Star-CD with V2-F model meet the same problem. Results by the code of this paper are close to those by CFX with K-ω-SST-ML transition model. Adopting transition model of Menter & Langtry (Shear-Stess-Transition model) gives the best results by adjusting the transition onset momentum thickness Reynolds number and the inlet viscosity ratio, especially for the mid part of the suction side where the validation accuracy is of a serious shortage by traditional turbulence model. It is proved in this paper that commercial codes have the ability to simulate transition process and thermal boundary layer accurately, but the designer’s experience is of utmost importance. Robust transition turbulence model should be developed further. PSE stability analysis equation and e-N prediction method are both integrated in this paper. It is concluded that boundary layer stability analysis by PSE method can be applied to the prediction of the transition onset without too many experiences and is able to define the empirical turbulence parameters for the accurate simulation of thermal boundary layer for any airfoil, such as the very important transition onset momentum thickness Reynolds number.

The Performance of TFC Slider under Second-Order Discontinuous Boundary Conditions

Multiphysics-based Simulation on Heat Conduction Mechanism of TFC Head and Its Influencing Factors

Slip Boundary Conditions for Rough Surfaces

Simulation of Couette Flow Using Conventional Burnett Equations with Modified Slip Boundary Conditions

Simulation of Flow and Heat Transfer in Micro Couette Flow

Burnett Simulation of Flow and Heat Transfer in Micro Couette Flow Using Second-Order Slip Conditions

A Simulation Method of Thermo-Mechanical and Tribological Coupled Analysis in Dry Sliding Systems

The Fluid-Structure-Thermal Performance Analysis of Gas Foil Thrust Bearing by Using Computational Fluid Dynamics

Slip Boundary Conditions in Ballistic–Diffusive Heat Transport in Nanostructures

The Application Of Discontinuous Galerkin Methods In Conjugate Heat Transfer Simulations Of Gas Turbines

Thermoelastic Coupling Problems Caused by Thermal Contact Resistance: A Discontinuous Galerkin Finite Element Approach

Experimental and Finite Element Analysis of Frictional Heat Distribution during Sliding Friction

Calculation of Temperature Field in Dry Sliding Contact at Different Speeds

Study on the Second-Order Transfer Function Models for Dynamic Tests of Flat-Plate Solar Collectors Part II: Experimental Validation

Applications of Discontinuous Galerkin Finite Element Method in Thermomechanical Coupling Problems with Imperfect Thermal Contact

Study of Hyperbolic Heat Conduction Problem in the Film and Substrate Composite with the Interface Resistance

On the Temperature Rise of Bodies Subjected to Unidirectional or Oscillating Frictional Heating and Surface Convective Cooling

Numerical Simulation and Experimental Verification on Thermal Performance of A Novel Fin-Plate Thermosyphon

Heat transfer behavior caused by temperature difference in reciprocating sliding contact

Conjugate Heat Transfer Numerical Validation and PSE Analysis of Transonic Internally-Cooled Turbine Cascade

Thermoelastic Simulations Based On Discontinuous Galerkin Methods: Formulation And Application In Gas Turbines