Abstract:Temperature is one of the critical factors that strongly affect the behavior of hydrogen isotopes in tungsten (W). This work investigates the effect of initial exposure temperature on the deuterium (D) retention and surface blistering in recrystallized W. D plasma exposure is started at 420 K and 600 K, respectively, and then changed to the same temperature of 520 K. For each temperature, the irradiation fluence is ∼ 1 × 1026 D m−2, and therefore the total fluence is ∼ 2 × 1026 D m−2 for each sample. A reference W sample was also exposed at 520 K with the same total fluence. Compared with the reference sample, it is found that the initial temperature of 420 K significantly inhibits the formation of intergranular blisters and leads to a reduction of intragranular blisters in size. Although the initial temperature of 600 K facilitates the formation of intergranular blisters, the intergranular blister size is reduced. This is possibly related to the relatively higher concentration of trapped D over a large depth range as revealed by the TMAP simulation results, leading to the fact that intergranular cracks are more prone to propagate along sloping grain boundaries. Thermal desorption spectra results show that the initial exposure temperature of 420 K and 600 K reduce D retention by a factor of ∼ 56 % and ∼ 34 %, respectively. It is considered to be connected with the blistering-induced defects and D transport in W, which are strongly affected by the initial exposure temperature. This work demonstrates that the initial exposure temperature plays a crucial role in D behavior in W, improving the understanding of the temperature effects of hydrogen isotopes behavior in W.

Effect of crystal orientation on low flux helium and hydrogen ion irradiation in polycrystalline tungsten

Crystal orientation effects on helium ion depth distributions and adatom formation processes in plasma-facing tungsten

Effect of Crystal Orientation on Self-Assembly Nanocones Formed on Tungsten Surface Induced by Helium Ion Irradiation and Annealing

Helium effects on the surface and subsurface evolutions in single-crystalline tungsten

Mechanisms of helium irradiation blistering and surface deformation in tungsten

Effect of surface orientation on blistering of copper under high fluence keV hydrogen ion irradiation

Observations of Orientation Dependence of Surface Morphology in Tungsten Implanted by Low Energy and High Flux D Plasma

Hydrogen Behaviors at the Near-Surface Region of Tungsten: A First-Principles Study

Deuterium Blistering in Tungsten and Tungsten Vanadium Alloys

Effect of Surface Quality on Hydrogen/helium Irradiation Behavior in Tungsten

Orientation-dependent indentation response of helium-implanted tungsten

Influence of heavy ions pre-damage on the blistering and helium bubble in tungsten under helium ions irradiation

Surface Modification of W–V Alloy Exposed to High Heat Flux Helium Neutral Beams

Irradiation hardening induced by blistering in tungsten due to low-energy high flux hydrogen plasma exposure

Mechanism for Orientation Dependence of Blisters on W Surface Exposed to D Plasma at Low Temperature

The Influence of Crystal Orientation and Thermal State of a Pure Cu on the Formation of Helium Blisters

Nanostructure Evolution and Surface Modification of Tungsten Exposed to Low Energy, High Flux Deuterium Plasma

Effect of initial exposure temperature on the deuterium retention and surface blistering in tungsten

Key mechanistic features of swelling and blistering of helium-ion-irradiated tungsten

Effect of Hydrogen on the Slip Resistance of Tungsten Single Crystals

Impact of helium and hydrogen plasma exposure on surface damage and erosion of tungsten