Abstract:Sulfate-induced concrete deterioration is associated with not only its material compositions but also environmental conditions. This study has performed some experimental investigations on the influence of fly ash (FA) and chlorides on the behavior of sulfate attack in blended cement pastes, and they were quantitatively characterized by the contents of bound sulfates and chlorides. Firstly, FA-blended cement paste particles (FCPs) with different FA content were prepared, and then they were performed a series of immersion experiments. Finally, free sulfate and chloride concentrations in the solutions were measured by using ultraviolet spectrophotometry and silver nitrate titration, respectively, while the change of phase and chemical compositions in FCPs were analyzed by quantitative X-ray diffraction (QXRD), scanning electron microscopy and energy spectrometry (SEMEDS). Results showed that, the addition of FA can not only increase the aluminum content in FCPs, improving the formation of sulfates-contained phases in Na2SO4 solution, but also influence the content and chemical compositions of C-(A)-S-H, resulting in the decrease of physical binding capacity of sulfates. The content of physically bound sulfates can be released by the sulfate-induced decalcification of C-(A)-S-H. After the sulfates-contained FCPs were immersed into NaCl solutions, the presence of chlorides can release the bound sulfates from the sulfates-contained phases, resulting in the formation of chlorides-contained phases. Additionally, the releasing effect of chlorides on the physically bound sulfates becomes more pronounced than that on the chemically bound sulfates, especially in the chloride solution with a high concentration. Eventually, these conclusions were consistent with the SEM-EDS results.

Experiment on Cement-Based Materials with Various Compositions Against Sulfate Attack

Sulphate attack resistance of high-performance concrete under compressive loading

Investigating the sulfate resistance of mortars with multiple mineral admixtures in ammonium-magnesium sulfate solution

Development of Cementitious Materials with High Resistance to Sulfate Attack by A Combination of Emulsified Asphalt and Fly Ash

Effect of Mineral Admixtures on Sulfate Attack Resistance of Cement-Based Materials

Effects and Mechanisms of Mineral Admixtures on Sulfate Attack of Cement Mortars

Experimental Investigation On Mineral Admixture In Improving The Properties Of Concrete To Sulfate Attack

Deterioration behaviors of sulfate crystallization attack on cement-based material

Deterioration Mechanism of Plain and Blended Cement Mortars Partially Exposed to Sulfate Attack

Properties evolution of calcium sulfoaluminate cement blended with ground granulated blast furnace slag suffered from sulfate attack

Form and mechanism of sulfate attack on cement-based material made of limestone powder at low water-binder ratio under low temperature conditions

Research on the Sulfate Resistance of Cement-Based Materials Incorporating Dolomite Powder

Resistance Against Sulfate Attack of Cement Mortar Blended with Ultrafine Slag Powder

Influence of Cement Types and Mineral Admixtures on Resistance of Mortar to Sulfate Attack under Lower Temperature

Research on Sulfate Resistance of the Limestone-Slag Cement Mortars

Experiments on Chloride Binding and Its Release by Sulfates in Cementitious Materials

Influence of Binder Composition on the Thaumasite Form of Sulfate Attack of Concrete

Resistance of the Composite Cementitious System of Ordinary Portland/calcium Sulfoaluminate Cement to Sulfuric Acid Attack

Effect of environmental pH values on phase composition and microstructure of Portland cement paste under sulfate attack

Influence of Fly Ash and Chlorides on the Behavior of Sulfate Attack in Blended Cement Pastes

Durability self-compacting mortar under external chemical attacks based on composite binder