Abstract:Sulfate resistance of high-volume fly ash/cement mortars hybrid containing 0~1.5 wt.% of nano-silica (Nano-SiO2, NS) and 0~1.0 vol.% of polyvinyl alcohol (PVA) fibers was investigated in this study. Fly ash was replaced with Portland cement at levels of 60% by weight. The resistance to sulfate attack was investigated by exposing the mortars to 10 wt.% sodium sulfate (Na2SO4) solutions for 72 days, after which change in mass, compressive, and flexural strengths were determined. For comparison, the compressive and flexural strengths of cement mortar after 100 days of curing in water were also investigated. Microstructural deteriorations caused by sulfate attack were analyzed by using scanning electron microscope (SEM). The test results showed that the combination of NS and PVA fibers was effective in enhancing the mechanical properties and the resistance to sulfate attack. After 28 days curing, the hybrid addition of 1.5 wt.% NS and 1.0 vol.% PVA fibers increased the flexural strength by 90% over the control one without NS and PVA fiber. Moreover, regardless of PVA fibers content, due to the crystal nucleus and pore-filling effects, the adding of 0.5 wt.% NS increased the compressive strength by 67.1~118.2%. Chemical reaction took place between fly ash and Na2SO4 as no un-hydration particles could be observed in the samples immersed in Na2SO4 solutions for 72 days, while a lot of un-hydration fly ash particles could be found in the SEM image of mortar after 100 days curing in water. The chemical reaction production could increase the adhesive property and fill the pores of cement mortar. As a result, the compressive and flexural strengths of cement mortars after immersed in Na2SO4 solution for 72 days, were much higher than that after 28 days curing. Moreover, the compressive strength of mortars incorporating 1.0~1.5 wt.% NS was even higher than that after 100 days curing in water, indicating the combination of Nano-SiO2/PVA fiber is effective in enhancing the resistance to sulfate attack.

Effect of Different Mineral Admixtures on Sulfate Attack to Mortars

The Synergy Effect of Limestone Powder and Mineral Admixtures on the Mechanical Property of Mortar

Investigating the sulfate resistance of mortars with multiple mineral admixtures in ammonium-magnesium sulfate solution

Research on the Sulfate-resistant Chemical Attack Mechanism of Concrete with Mineral Admixture

Sulfate attack on concrete with mineral admixtures

Effects of active mineral admixture on mechanical properties and durability of concrete

Properties evolution of calcium sulfoaluminate cement blended with ground granulated blast furnace slag suffered from sulfate attack

Effect of steel slag powder, fly ash, and silica fume on the mechanical properties and durability of cement mortar

Effects of Mineral Admixture on Properties of Young Concrete

Study on the Chloride–Sulfate Resistance of a Metakaolin-Based Geopolymer Mortar

EXPERIMENTAL STUDY ON SODIUM SULFATE ATTACK ON MORTAR CONTAINING LIMESTONE POWDER AND FLY ASH AT EARLY AGE

Effect of mineral admixtures on the resistance to sulfate attack of reactive powder concrete

Influence of the Initial Moist Curing Time on the Sulfate Attack Resistance of Concretes with Different Binders

Chemical–physical–mechanical Stability of MKG Mortars under Sulfate Attacks

Effect of Limestone Powder and Fly Ash on Magnesium Sulfate Resistance of Mortar

Study on the chloride ion binding rate of sulfoaluminate cement mortars containing different mineral admixtures

Effect of ultrafine slag powder addition on performance of cement mortar subjected to ( NH4) 2SO4 solution

Deterioration of Mortar Bars Using Binary and Ternary Mixtures Immersed in Sodium Sulfate Solutions

Effect of Nano-SiO2/PVA Fiber on Sulfate Resistance of Cement Mortar Containing High-Volume Fly Ash

Investigation on Hydration and Mechanical Properties of Mortar Containing Limestone Powder and Fly Ash Based on the Coupled Chemical–Thermal–Mechanical Method

The influence of mineral admixtures on bending strength of mortar on the premise of equal compressive strength