Abstract:In order to investigate the influence of various factors on working performance, mechanical properties and durability of sustainable Reactive Powder Concrete (RPC), and make it convenient for choose more cost-effective RPC incorporating industrial byproducts. The effective parameters (water-binder ratio, contents of water reducer, replacement ratios of fly ash (FA), silica fume (SF) and slag powder (SL)) of RPCs were examined by the tests of paste fluidity, compressive and flexural strength as well as water absorption. Besides, the effect of the active mineral admixtures on pore size distribution and surface morphology of RPCs was studied by Mercury Injection Porosimeter (MIP) and Scanning electron microscope (SEM). Results indicate that an obvious reduction in the workability of RPC, enhancement of strength, and reduction in water absorption can be achieved by substituting part of the cement with silica fume. Fly ash and slag powder can be used to substitute some cement in producing RPC, and the workability is improved, meanwhile the effect of fly ash is higher than that of slag powder. However, excessive replacement of cement with slag powder or fly ash leads to a reduction of the strength in the early stage and a greater absorption of water. Increment of curing age is associated with an enhancement of strength and a decrease in water absorption. The porosity is reduced by 5.2% when cement is partially replaced with silica fume, and the microstructure is dominated by harmless pores. When replacement of silica fume is kept at 25%, using slag powder or fly ash substitute part of cement also reduces the number of less harmful pores. It is beneficial to add slag powder to increase the number of gel pores, whereas fly ash reduces the number of gel pores. RPC can achieve a high strength, low water absorption, and improved economy and environmental protection when silica fume replaces up to 25% cement, slag powder or fly ash replaces up to 30% cement. This investigation is expected to provide a practical method in the mix design and engineering application of economical and sustainable RPC.

Effect of mineral admixtures on the resistance to sulfate attack of reactive powder concrete

Study on the workability, mechanical property and water absorption of reactive powder concrete

The hydration properties of ultra-fine ground granulated blast-furnace slag cement with a low water-to-binder ratio

Performance and microscopic study of various mineral admixtures on reactive powder concrete

Mechanical properties of sustainable reactive powder concrete made with low cement content and high amount of fly ash and silica fume

Effect of Fly Ash on Some Properties of Reactive Powder Concrete

Chloride Ion Penetration Resistance of Reactive Powder Concrete with Mineral Admixtures

Impact of using different materials, curing regimes, and mixing procedures on compressive strength of reactive powder concrete - A review

A Modified Reactive Powder Concrete Made with Fly Ash and River Sand: An Assessment on Engineering Properties and Microstructure

Investigating the sulfate resistance of mortars with multiple mineral admixtures in ammonium-magnesium sulfate solution

Effect on Sulfuric Acid Resistance and Shrinkage of Concrete Incorporating Processed Bagasse Ash and Silica Fume

Evaluation of compressive strength and chloride permeability of cement-based materials with high-volume compound mineral admixtures

Admixture Effects on the Rheological/Mechanical Behavior and Micro-Structure Evolution of Alkali-Activated Slag Backfills

Compressive Strength Development of Dune Sand Reactive Powder Concrete (RPC) Under Different Curing Conditions

Strength and Durability of Geo-Polymer Concrete with Mineral Admixture

Effect of steel slag powder, fly ash, and silica fume on the mechanical properties and durability of cement mortar

The Corrosion Resistance of Reinforced Reactive Powder Concrete with Secondary Aluminum Ash Exposed to NaCl Action

Hydration and microstructure evolution of a novel low-carbon concrete containing recycled clay brick powder and ground granulated blast furnace slag

Effects of Gypsum and Limestone Powder on Fresh Properties and Compressive Strength of Concrete Containing Ground Granulated Blast Furnace Slag under Different Curing Temperatures

Study of Mechanical Properties of Reactive Powder Concrete with Additives

Synergetic Effect of Fly Ash and Ground-Granulated Blast Slag on Improving the Chloride Permeability and Freeze–thaw Resistance of Recycled Aggregate Concrete