Abstract:Purpose - The purpose of this paper is to focus on the accurate and steady control on trajectory tracking for wafer transfer robot, suppress the vibration and reduce the contour error.Design/methodology/approach - The wafer transfer robot dynamic model is modeled. Through analyzing the characteristics of wafer transfer robot, cross-coupled synchronized control is proposed based on the contour error model in task space to improve synchronization of the joints; the shaping for the joints by input shaper in task space is applied to suppress the vibration of the end effector during trajectory tracking. Then combining the cross-coupled synchronized control with input shaping is proposed to improve accuracy and suppress the vibration.Findings - The combination of cross-coupled synchronized control and input shaping control method can improve the contour accuracy and reduce the vibration simultaneously during trajectory tracking. And the control method can be used to control the trajectory of wafer transfer robot.Research limitations/implications - The transfer station is in the center of the robot body. When the transfer station may deviate from the center of the robot body, the synchronizing performance of three axes on the same plane must be considered.Practical implications - The proposed method can be used to solve the vibration and synchronizing performance problems on similar SCARA robots in semi-conductor and liquid crystal display industry.Originality/value - The proposed control method takes advantage of the cross-coupled synchronized control and input shaping control method. This combination has improved contour accuracy and reduced vibration than applying other methods, and it has achieved better performance than using single one control method only.

The Model of Transfer Robot in Chemical Mechanical Polishing

Model and LQ control of transfer robot in chemical mechanical polishing

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

Dynamic Modeling and Trajectory Tracking Control of a Novel Muck-Removal Hydraulic Manipulator

Modeling and Control of a Continuous Stirred Tank Reactor Based on a Mixed Logical Dynamical Model

Slow Motion Control of Serial Robots with Harmonic Drives Considering Friction Compensation

A Lightweight Chip-Scale Chemical Mechanical Polishing Model Based On Polynomial Network

Kinematics Analysis of a Hybrid Manipulator for Computer Controlled Ultra-Precision Freeform Polishing

Rigid–flexible coupling dynamics analysis with joint clearance for a 5-DOF hybrid polishing robot

Accurate And Steady Control On Trajectory Tracking For The Wafer Transfer Robot

Dynamic Simulation of Modular Robot Joint with Friction and Flexibility

Modeling and simulating the nonlinear characters of robot joints

Dynamic Analysis of a Linear Delta Robot in Hybrid Polishing Machine Based on the Principle of Virtual Work

A nonlinear dynamic characteristic modeling method of shift manipulator for robot driver with multiple clearance joints

Identification of dynamic parameters of closed-chain industrial robots considering motor couplings

Robotic Polishing of Unknown-Model Workpieces With Constant Normal Contact Force Control

Complete Kinematics/Dynamics Modeling and Performance Analysis of a Novel SCARA Parallel Manipulator Based on Screw Theory

Modelling and control of inverse dynamics for a 5-DOF parallel kinematic polishing machine

Movement Control of Small Moving Robots for Large Curved Surfaces Polishing

A Coupled Material Removal Model for Chemical Mechanical Polishing Processes

A chemical mechanical polishing model incorporating both the chemical and mechanical effects