Abstract:Off-line programming of the polishing tool trajectory for complex workpieces is challenging due to the nontrivial material removal model and the polishing accuracy requirement. Current tool trajectory planning methods are mainly developed for some simple surfaces but cannot handle the increasingly complicated industrial parts, such as the wheel hubs. This article first develops a numerical contact mechanics model for the point-sampled complex workpieces. The contact pressure distribution and the material removal depths on the workpiece point cloud can be predicted efficiently. A novel high-priority subregion searching algorithm is developed to track the most-worth-polishing workpiece points. By selecting the path pattern as direction-parallel, the path direction, tool dwell times, and the path spacings inside each extracted subregion are optimized to minimize the deviation from the desired material removal depths. The effectiveness of the proposed method is verified by performing disk polishing simulations on workpieces with different shapes. A robotic polishing experiment is also conducted on a wheel hub. Both simulation and experimental results show that reasonable tool trajectories can be generated on the workpiece, and the desired material removal depths can be achieved. Note to Practitioners—In robotic polishing industries, it is crucial to plan the tool trajectory (tool path and feed velocity) to achieve desired material removal depths on the workpiece surface, which means high surface quality. In this article, a model-based tool trajectory planning method for robotic polishing of complex surfaces that are represented by the point cloud form is presented. The advantage of using the point cloud is that workpiece surfaces with varying curvatures and complex features, e.g., grooves and holes, need not be expressed explicitly. The proposed method generates high-priority subregions according to the updated material removal distribution dynamically. In this work, the polishing path pattern is chosen as direction-parallel. Based on an efficient numerical contact mechanics and material removal model, the path locations and the tool dwell times inside each subregion are optimized to minimize the deviation between the actual and the desired material removal depths. When the desired material removal depths are attained in an extracted subregion, the algorithm finds the next high-priority subregion until the whole workpiece is well polished. The trajectory planning method can be integrated into an industrial robot with the force-control module. Future work is to integrate the roughness model into the tool trajectory planning method.

Movement Control of Small Moving Robots for Large Curved Surfaces Polishing

Kinematics Simulation of Adaptive Polishing Robot for Large Freeform Surface

Research on Kinematics of Robot in Free-Form Surface Polishing

Path Planning under Force Control in Robotic Polishing of the Complex Curved Surfaces

Smooth Joint Motion Planning for Robot Polishing by Redundancy Optimization.

Research and application on force control of industrial robot polishing concave curved surfaces

Development and Polishing Process of a Mobile Robot Finishing Large Mold Surface

Robotic Polishing of Unknown-Model Workpieces With Constant Normal Contact Force Control

Study on Profile-Adaptive Tool System for Small Robots in Large Freeform Surface Polishing

A New Aspheric Surfaces Polishing by Parallel Orthogonality Movement/Force Servomechanism

Performance Optimization of Robotic Polishing System with a 3-DOF End-Effector Using Trajectory Planning Method.

Surface polishing by industrial robots: a review

An Investigation of Real-Time Robotic Polishing Motion Planning Using a Dynamical System

Rigid–flexible coupling dynamics analysis with joint clearance for a 5-DOF hybrid polishing robot

The kinematics solving algorithm of single-axis polishing machine

Research on Configuration Design Optimization and Trajectory Planning of Manipulators for Precision Machining and Inspection of Large-Curvature and Large-Area Curved Surfaces

Automatic Surface Polishing Based on Probe Measurement and Force-Position Decoupling Control

Simultaneous tool posture and polishing force control of unknown curved surface using serial-parallel mechanism polishing machine

Dynamic Analysis of a Linear Delta Robot in Hybrid Polishing Machine Based on the Principle of Virtual Work

A Model-Based Trajectory Planning Method for Robotic Polishing of Complex Surfaces.

Research on the automatic programming system for industrial robots in free-form surfaces polishing