Abstract:Purpose This paper aims to present an adaptive sliding mode control (ASMC) for tunnel boring machine cutterhead telescopic system with uncertainties to achieve a high-precision trajectory in complex strata. This method could be applied to solve the problems caused by linear and nonlinear model uncertainties. Design/methodology/approach First, an integral-type sliding surface is defined to reduce the static tracking error. Second, a projection type adaptation law is designed to approximate the linear and nonlinear redefined parameters of the electrohydraulic system. Third, a nonlinear robust term with a continuous approximation function is presented for handling load force uncertainty and reducing sliding mode chattering. Moreover, Lyapunov theory is applied to guarantee the stability of the closed-loop system. Finally, the effectiveness of the proposed controller is proved by comparative experiments on a scaled test rig. Findings The linear and nonlinear model uncertainties lead to large variations in the dynamics of the mechanism and the tracking error. To achieve precise position tracking, an adaptation law was integrated into the sliding mode control which compensated for model uncertainties. Besides, the inherent sliding mode chattering was reduced by a continuous approximation function, while load force uncertainty was solved by a nonlinear robust feedback. Therefore, a novel ASMC for tunnel boring machine cutterhead telescopic system with uncertainties can improve its tracking precision and reduce the sliding mode chattering. Originality/value To the best of the authors’ knowledge, the ASMC is proposed for the first time to control the tunnel boring machine cutterhead telescopic system with uncertainties. The presented control is effective not only in control accuracy but also in parameter uncertainty.

Dynamic Modeling and Trajectory Tracking Control of a Novel Muck-Removal Hydraulic Manipulator

Indirect Adaptive Robust Trajectory Tracking Control of Hard Rock TBM with Load Variation of Tunneling Face

Trajectory Tracking Control in Horizontal Direction of Open-type Hard Rock Tunnel Boring Machine Based on Adaptive Robust Control Strategy

Trajectory Tracking Control of A Hydraulic Parallel Robot Manipulator with Lumped Disturbance Observer

Trajectory Control of Tunnel Boring Machine Based on Adaptive Rectification Trajectory Planning and Multi-cylinders Coordinated Control

Modeling and Control of General Hydraulic Excavator for Human-in-the-loop Automation

Development of a novel muck removal hydraulic manipulator for automated steel arch assembly of tunnel boring machine

Adaptive Sliding Mode Control for Tunnel Boring Machine Cutterhead Telescopic System with Uncertainties.

Adaptive Robust Trajectory Tracking Control of a Parallel Manipulator Driven by Pneumatic Cylinders

A Novel Control Strategy of Gripper and Thrust System of TBM Based on Model Analysis

Coordinated Control of Gripper and Thrust System for TBM Based on Construction Data

Motion Control of a Hydraulic Manipulator with Adaptive Nonlinear Model Compensation and Comparative Experiments

Advanced Motion Control of Hydraulic Manipulator with Precise Compensation of Dynamic Friction

Model-based Trajectory Tracking Control for an Electrohydraulic Lifting System with Valve Compensation Strategy

Energy-Saving Trajectory Tracking Control of a Multi-Pump Multi-Actuator Hydraulic System.

Trajectory Tracking Control of a 6-DOF Hydraulic Parallel Robot Manipulator with Uncertain Load Disturbances

Backstepping Based Trajectory Tracking Control of a TBM Steel Arch Splicing Manipulator

Hybrid Motion/Force Control of the Hydraulic Cooperative Manipulator in Constrained Motion

Hierarchical Decoupling Controller with Cylinder Separated Model of Hydraulic Manipulators for Contact Force/Motion Control

Prescribed performance dynamic surface control based on dual extended state observer for 2-dof hydraulic cutting arm

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator