Abstract:Multiple degrees-of-freedom (multi-DOF) hydraulic manipulators are usually recognized as hard-to-control systems to achieve dynamic trajectory tracking because of strong nonlinearities, uncertainties, and complex couplings within the dynamics. In practice, when the end-effector of the multi-DOF hydraulic manipulator is tracking a given trajectory continuously, some joints may experience frequent stop-and-go or low-speed motions due to its kinematics. In such situations, dynamic friction becomes one of the main factors that affect the control performance. Inadequate compensation for the dynamic friction can result in undesired crawling or oscillatory behaviors of the manipulator. However, it is challenging to make effective compensation of the dynamic friction in control design due to its complicated and nonlinear properties. In this article, motion control of a multi-DOF hydraulic manipulator with extra consideration on the nonlinear friction for dynamic trajectory tracking is proposed. First, to make a more precise compensation of the nonlinear friction force, an improved LuGre model ensuring continuity and differentiability is developed, along with the method for obtaining nominal values of internal friction state based on desired trajectories. Then, a model-based adaptive robust motion controller is developed for the multi-DOF hydraulic manipulator. The nonlinearities and uncertainties of the high-order dynamics are well addressed in the closed-loop system, and the transient and asymptotic tracking performance can be guaranteed in theory. Finally, experimental validation was conducted, and the comparison with existing methods showed the improved tracking performance.

Trajectory Tracking Control of a 6-DOF Hydraulic Parallel Robot Manipulator with Uncertain Load Disturbances

Trajectory Tracking Control of A Hydraulic Parallel Robot Manipulator with Lumped Disturbance Observer

Global Sliding Mode Control Of Electro-Hydraulic 6-Dof Parallel Robots

Synchronous Tracking Control of 6-DOF Hydraulic Parallel Manipulator Using Cascade Control Method

Nonlinear adaptive position tracking of an electro-hydraulic actuator

Observer-based Cascade Control of a 6-DOF Parallel Hydraulic Manipulator in Joint Space Coordinate

Adaptive Robust Trajectory Tracking Control of a Parallel Manipulator Driven by Pneumatic Cylinders

Adaptive robust posture control of a parallel manipulator driven by pneumatic muscles

Disturbance Observer Based Position Tracking of Electro-Hydraulic Actuator

Compensator of the Disturbance Force for the Trajectory Tracking of Hydraulic 6-DOF Parallel Platform

Advanced Motion Control of Hydraulic Manipulator with Precise Compensation of Dynamic Friction

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Hybrid Motion/Force Control of the Hydraulic Cooperative Manipulator in Constrained Motion

Motion Control of a Hydraulic Manipulator with Adaptive Nonlinear Model Compensation and Comparative Experiments

Observer-based Control for Robotic Manipulations with Uncertain Kinematics and Dynamics

Practical Prescribed Tracking Control of n-DOF Robotic Manipulator with Uncertainties via Friction Compensation Approach

Robotic Manipulator Control Based on Disturbance Observer: A High-Order Fully Actuated System Approach

Model-based control of spatial 6-DOF hydraulic parallel robot manipulator

Nonsingular Terminal Sliding-Mode Control for Robotic Manipulator System with Adaptive Uncertainty and Disturbance Rejection

Enhanced Robust Motion Control based on Unknown System Dynamics Estimator for Robot Manipulators

Research on the Trajectory Tracking Control of a 6-DOF Manipulator Based on Fully-Actuated System Models