Abstract:Purpose This paper aims to present an adaptive sliding mode control (ASMC) for tunnel boring machine cutterhead telescopic system with uncertainties to achieve a high-precision trajectory in complex strata. This method could be applied to solve the problems caused by linear and nonlinear model uncertainties. Design/methodology/approach First, an integral-type sliding surface is defined to reduce the static tracking error. Second, a projection type adaptation law is designed to approximate the linear and nonlinear redefined parameters of the electrohydraulic system. Third, a nonlinear robust term with a continuous approximation function is presented for handling load force uncertainty and reducing sliding mode chattering. Moreover, Lyapunov theory is applied to guarantee the stability of the closed-loop system. Finally, the effectiveness of the proposed controller is proved by comparative experiments on a scaled test rig. Findings The linear and nonlinear model uncertainties lead to large variations in the dynamics of the mechanism and the tracking error. To achieve precise position tracking, an adaptation law was integrated into the sliding mode control which compensated for model uncertainties. Besides, the inherent sliding mode chattering was reduced by a continuous approximation function, while load force uncertainty was solved by a nonlinear robust feedback. Therefore, a novel ASMC for tunnel boring machine cutterhead telescopic system with uncertainties can improve its tracking precision and reduce the sliding mode chattering. Originality/value To the best of the authors’ knowledge, the ASMC is proposed for the first time to control the tunnel boring machine cutterhead telescopic system with uncertainties. The presented control is effective not only in control accuracy but also in parameter uncertainty.

Coordinated Control of Gripper and Thrust System for TBM Based on Construction Data

A Novel Control Strategy of Gripper and Thrust System of TBM Based on Model Analysis

Coordinated control of gripper and thrust system for single gripping TBM

Indirect Adaptive Robust Trajectory Tracking Control of Hard Rock TBM with Load Variation of Tunneling Face

Trajectory Tracking Control in Horizontal Direction of Open-type Hard Rock Tunnel Boring Machine Based on Adaptive Robust Control Strategy

Design and simulation analysis of gripper and thrust energy-saving system for TBM test rig

Research on geologic adaptive control of ground pressure for single gripping TBM

Trajectory Control of Tunnel Boring Machine Based on Adaptive Rectification Trajectory Planning and Multi-cylinders Coordinated Control

Pose and trajectory control of shield tunneling machine in complicated stratum

Performance Analysis of Electro-Hydraulic Thrust System of TBM Based on Fuzzy PID Controller

THRUST HYDRAULIC SYSTEM OF SHIEID TUNNEL BORING MACHINE WITH PRESSURE AND FLOW COMPOUND CONTROL

Dynamic Modeling and Trajectory Tracking Control of a Novel Muck-Removal Hydraulic Manipulator

Motion Control of Thrust System for Shield Tunneling Machine

Precision Versus Intelligence: Autonomous Supporting Pressure Balance Control for Slurry Shield Tunnel Boring Machines

Precise control of thrust force on the shield tunneling machine

Synchronous control of TBM cutterhead driving system based on single-neuron fuzzy strategy

Control model of earth pressure balance for shield tunneling

Supervisory Control of Thrust Hydraulic System for Shield Tunnelling Machine

Hydraulic System Integration and Experimental Analysis of Shield Tunnelling Machine for Simulator Test Rig

Adaptive Sliding Mode Control for Tunnel Boring Machine Cutterhead Telescopic System with Uncertainties.

Simulation and Experimental Analyses of Synchronization Control for Shield Thrust System