Abstract:Purpose - The purpose of this paper is to focus on the accurate and steady control on trajectory tracking for wafer transfer robot, suppress the vibration and reduce the contour error.Design/methodology/approach - The wafer transfer robot dynamic model is modeled. Through analyzing the characteristics of wafer transfer robot, cross-coupled synchronized control is proposed based on the contour error model in task space to improve synchronization of the joints; the shaping for the joints by input shaper in task space is applied to suppress the vibration of the end effector during trajectory tracking. Then combining the cross-coupled synchronized control with input shaping is proposed to improve accuracy and suppress the vibration.Findings - The combination of cross-coupled synchronized control and input shaping control method can improve the contour accuracy and reduce the vibration simultaneously during trajectory tracking. And the control method can be used to control the trajectory of wafer transfer robot.Research limitations/implications - The transfer station is in the center of the robot body. When the transfer station may deviate from the center of the robot body, the synchronizing performance of three axes on the same plane must be considered.Practical implications - The proposed method can be used to solve the vibration and synchronizing performance problems on similar SCARA robots in semi-conductor and liquid crystal display industry.Originality/value - The proposed control method takes advantage of the cross-coupled synchronized control and input shaping control method. This combination has improved contour accuracy and reduced vibration than applying other methods, and it has achieved better performance than using single one control method only.

Model and LQ control of transfer robot in chemical mechanical polishing

The Model of Transfer Robot in Chemical Mechanical Polishing

Advanced Motion Control of Hydraulic Manipulator with Precise Compensation of Dynamic Friction

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Direct Optimization Based Compensation Adaptive Robust Control of Nonlinear Systems with State and Input Constraints

Modelling and control of inverse dynamics for a 5-DOF parallel kinematic polishing machine

Kinematics Analysis of a Hybrid Manipulator for Computer Controlled Ultra-Precision Freeform Polishing

Robotic Polishing of Unknown-Model Workpieces With Constant Normal Contact Force Control

ACTIVE STRUCTURAL CONTROL BASED ON LQG/LTR METHOD

Modeling and Control for a Long-Stroke 4-PPR Compliant Parallel Mechanism

Hybrid Force/Position Control Method for Robotic Polishing Based on Passive Compliance Structure

Adaptive Robust Control of Linear Motors with Dynamic Friction Compensation Using Modified LuGre Model

Accurate And Steady Control On Trajectory Tracking For The Wafer Transfer Robot

A hybrid control strategy for grinding and polishing robot based on adaptive impedance control

Adaptive friction compensation control of robotic pneumatic end-effector based on LuGre model

Adaptive Robust Motion Control of the Surface Mounting Equipment with Dynamic Friction Compensation

CMP Pressure Control Based on Dual-Modes Controller

Design and constant force control of a parallel polishing machine

Nonlinear Compenstion Control of Underactuated Manipulator

Rigid–flexible coupling dynamics analysis with joint clearance for a 5-DOF hybrid polishing robot

Modeling and Active Vibration Control of an Intelligent Flexible Manipulator System