Abstract:Methyl acetate (MA) hydrogenation to ethanol was investigated over SBA-15 supported copper (Cu/SBA-15) catalysts prepared by different methods, including impregnation, deposition precipitation, and homogeneous deposition precipitation. The catalysts were characterized by means of the Brunauer-Emmett-Teller method, X-ray diffraction, transmission electron microscopy, temperature-programmed reduction and X-ray photoelectron spectroscopy. Of the three catalysts, it was found that the Cu/SBA-15 catalyst prepared by the homogeneous deposition precipitation method has the smallest particle size, and the appropriate Cu+/(Cu+ + Cu-0) molar ratio of 53.5%. The high dispersion of the active components, and the synergetic effect between Cu-0 and Cu+ contributed to the high activity of Cu/SBA-15 prepared via the homogeneous deposition precipitation method. A MA conversion of 93.6% with an ethanol selectivity of 98.5% was obtained for MA hydrogenation in methanol solution under mild reaction conditions. Both of these values were much higher than those obtained over catalysts prepared by the other two methods. The catalyst still maintained good performance in the co-hydrogenation of acetic acid and MA in methanol solution. A high MA conversion of 99.5% and an ethanol selectivity of 99.5% were obtained for pure MA hydrogenation over the best catalyst. It was found that methanol solution inhibited the conversion of MA, and suppressed the side reaction of MA trans-esterification with the product ethanol at higher LHSV.

The Influence of Different Precipitants on the Copper-Based Catalysts for Hydrogenation of Ethyl Acetate to Ethanol

Advances in copper-based catalyst for the methanol synthesis from CO2 hydrogenation

Influence of Copper Precursors on the Structure Evolution and Catalytic Performance of Cu/HMS Catalysts in the Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

Effect of supports on performance of Cu-based catalysts for hydrogenation of ethyl acetate to ethanol

Effect of the Cu/SBA-15 catalyst preparation method on methyl acetate hydrogenation for ethanol production

Co-production of Hydrogen and Acetaldehyde from Ethanol over a Highly Dispersed Cu Catalyst

An Effective CuZn–SiO2 Bimetallic Catalyst Prepared by Hydrolysis Precipitation Method for the Hydrogenation of Methyl Acetate to Ethanol

Influence of Precursor Concentration on Performance of Catalysts Prepared for the Hydrogenation of Dimethyl Oxalates

Zn promoted Cu–Al catalyst for hydrogenation of ethyl acetate to alcohol

Process research on the catalytic hydrogenation of methyl acetate to ethanol

The Influence of Copper Particle Dispersion in Cu/SiO 2 Catalysts on the Hydrogenation Synthesis of Ethylene Glycol

Effect of Mn promoter on Cu-based catalyst for hydrogenation of ethyl acetate to ethanol

Influence of Catalyst Structure on Performance of Cu/Sio2 in Hydrogenation of Methyl Acetate

An Effective Cu-Ag/HMS Bimetallic Catalyst for Hydrogenation of Methyl Acetate to Ethanol

The Intrinsic Kinetics of Ethyl Acetate Hydrogenation to Ethanol

Tuning of Cu-ZnO Interaction on Nanoflower-Like Cu/ZnO Catalyst for the Hydrogenation of Methyl Acetate

The Effect of Preparation Method on the Performance of PtSn/Al2O3 Catalysts for Acetic Acid Hydrogenation

Characterization of Cu/SiO2 Catalyst and Its Performance in Hydrogenation of Ethyl Acetate to Ethanol

Insights into the mechanism of ethanol synthesis and ethyl acetate inhibition from acetic acid hydrogenation over Cu2In(100): a DFT study.

DUAL PROMOTION OF Cu/ZnO CATALYSTS MODIFIED BY ACETYLACETONE PRECURSORS FOR CO2 HYDROGENATION TO METHANOL

Ethanol Dimerization to Ethyl Acetate and Hydrogen on the Multifaceted Copper Catalysts