Abstract:Silica-magnesia (Si/Mg=1:1) catalysts were studied in the one-pot conversion of ethanol to butadiene. The catalyst synthesis method was found to greatly influence morphology and performance, with materials prepared through wet-kneading performing best both in terms of ethanol conversion and butadiene yield. Detailed characterization of the catalysts synthesized through co-precipitation or wet-kneading allowed correlation of activity and selectivity with morphology, textural properties, crystallinity, and acidity/basicity. The higher yields achieved with the wet-kneaded catalysts were attributed to a morphology consisting of SiO2 spheres embedded in a thin layer of MgO. The particle size of the SiO2 catalysts also influenced performance, with catalysts with smaller SiO2 spheres showing higher activity. Temperature-programmed desorption (TPD) measurements showed that best butadiene yields were obtained with SiO2-MgO catalysts characterized by an intermediate amount of acidic and basic sites. A Hammett indicator study showed the catalysts' pK(a) value to be inversely correlated with the amount of dehydration by-products formed. Butadiene yields could be further improved by the addition of 1 wt% of CuO as promoter to give butadiene yields and selectivities as high as 40% and 53%, respectively. The copper promoter boosts the production of the acetaldehyde intermediate changing the rate-determining step of the process. TEM-energy-dispersive X-ray (EDX) analyses showed CuO to be present on both the SiO2 and MgO components. UV/Vis spectra of promoted catalysts in turn pointed at the presence of cluster-like CuO species, which are proposed to be responsible for the increased butadiene production.

Effect of the Cu/SBA-15 catalyst preparation method on methyl acetate hydrogenation for ethanol production

Influence of Catalyst Structure on Performance of Cu/Sio2 in Hydrogenation of Methyl Acetate

An Effective CuZn–SiO2 Bimetallic Catalyst Prepared by Hydrolysis Precipitation Method for the Hydrogenation of Methyl Acetate to Ethanol

Selective Hydrogenation of Dimethyl Maleate to Tetrahydrofuran over Cu/SiO2 Catalyst: Effect of Cu+ on the Catalytic Performance

Process research on the catalytic hydrogenation of methyl acetate to ethanol

Synthesis of Methyl Acetate by Dimethyl Ether Carbonylation over Cu/HMOR: Effect of Catalyst Preparation Method

Tuning of Cu-ZnO Interaction on Nanoflower-Like Cu/ZnO Catalyst for the Hydrogenation of Methyl Acetate

Preparation of Cu/Sba-15 Catalysts by Different Methods for the Hydrogenolysis of Dimethyl Maleate to 1,4-Butanediol

Alkali and Alkaline Earth Metals (K, Ca, Sr) Promoted Cu/SiO2 Catalyst for Hydrogenation of Methyl Acetate to Ethanol

Co-production of Hydrogen and Acetaldehyde from Ethanol over a Highly Dispersed Cu Catalyst

Cu/SiO2 Catalysts Prepared by the Ammonia-Evaporation Method: Texture, Structure, and Catalytic Performance in Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

One Pot Synthesis of Ultra-High Copper Contented Cu/Sba-15 Material As Excellent Catalyst in the Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

Cu/MgO as an Efficient New Catalyst for the Non-Oxidative Dehydrogenation of Ethanol into Acetaldehyde

Effect of preparation method and CuO promotion in the conversion of ethanol into 1,3-butadiene over SiO₂-MgO catalysts

DUAL PROMOTION OF Cu/ZnO CATALYSTS MODIFIED BY ACETYLACETONE PRECURSORS FOR CO2 HYDROGENATION TO METHANOL

A Cu-SiO2 Catalyst for Highly Efficient Hydrogenation of Methyl Formate to Methanol

Effect of support for alcohol-hydrocarbon synthesis from syngas in Cu-based catalyst

Gaseous Phase Hydrogenation of Ethyl Acetate Catalyzed by CuX/Mg-SiO2

Ethanol dehydrogenation to acetaldehyde over a Cu δ+ -based Cu-MFI catalyst

Optimizing CO 2 Hydrogenation to DME through Tailored Interfacial Interactions: Weakening Synergy in CuZnZr and Al-Modified SBA-15 Catalysts

Catalytic Performance and Reaction Pathways of Cu/SiO 2 and ZnO/SiO 2 for Dehydrogenation of Ethanol to Acetaldehyde