Influence of Catalyst Structure on Performance of Cu/Sio2 in Hydrogenation of Methyl Acetate

Qiu Kun-Zan,Guo Wen-Wen,Wang Hai-Xia,Zhu Ling-Jun,Wang Shu-Rong
DOI: https://doi.org/10.3866/pku.whxb201503272
2015-01-01
Abstract:Cu/SiO2 catalysts for the hydrogenation of methyl acetate (MA) to ethanol were prepared using the urea hydrolysis method. The catalysts were characterized using N-2-physisorption, X-ray diffraction (XRD), temperature-programmed reduction (TPR), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The effects of the copper loading and reduction temperature on the catalyst structure and catalytic performance were investigated. Experimental studies of the influence of the copper loading showed that a 20% (mass fraction, w) Cu/SiO2 catalyst had uniformly dispersed copper particles and a large number of active centers, and therefore gave the best hydrogenation performances among the three catalysts with the copper loadings of 10%, 20%, and 30%, respectively. Then 20% (w) Cu/SiO2 was reduced at different temperatures (270, 350, and 450 degrees C). The results showed that 20% (w) Cu/SiO2 reduced at 350 degrees C had the best catalytic activity. This was attributed to the homogeneous distribution of copper nanoparticles, and appropriate Cu-0/(Cu-0+Cu+) molar ratio, which achieved simultaneous dissociation of hydrogen and MA activation. Under the optimum reaction conditions, the MA conversion and ethanol selectivity reached 97.8% and 64.9% (theoretical maximum value: 66.6%), respectively.
What problem does this paper attempt to address?