Abstract:Both proton exchange membrane fuel cells (PEMFCs) and anion exchange membrane fuel cells (AEMFCs) can work efficiently at low temperature only at a high humidity, while their performance would decay doubly at a low humidity. In this work, we propose an acid-alkaline hybrid cathode approach to optimize the water management and achieve the operation of PEMFC at a low humidity, where the patterned acid-alkaline catalyst layer (CL) is used in cathode. The results show that the introduction of a patterned alkaline CL can significantly improve the performance of fuel cells at the low humidity. When the alkaline CL pattern is located in the middle of the cathode with 25% ratio, the peak power density (PPD) of resulting fuel cell reaches 1.02 W cm −2 at a 10% relative humidity, which is 31.72% higher than the PPD of the one without the alkaline CL. This improvement is attributed to the optimal water management because the water yielded by acidic CL can fast participate in the reactions in alkaline CL in the cathode. The distribution of relaxation time and computational fluid dynamics simulation further reveal that not only orientation of alkaline CL, but also the location of alkaline CL shows the key influence on the design of self-humidifying MEA. In short, this work proposes a new type of MEA with self-humidifying property to achieve the operation of MEA in a low humidity, which would greatly accelerate the development and application of fuel cells.

Self-Humidifying Membrane Electrode Assembly Prepared by Adding Microcrystalline Cellulose in Anode Catalyst Layer As Preserve Moisture

Membrane Electrode Assembly with Pt/SiO2/C Anode Catalyst for Proton Exchange Membrane Fuel Cell Operation under Low Humidity Conditions

High-performance Membrane Electrode Assembly with Multi-Functional Pt/SnO2–SiO2/C Catalyst for Proton Exchange Membrane Fuel Cell Operated under Low-Humidity Conditions

Self-humidifying membrane electrode assembly prepared by adding PVA as hygroscopic agent in anode catalyst layer

A novel preparation for a self-humidifying membrane electrode assembly and performance of its fuel cell

Development of Cathode Ordered Membrane Electrode Assembly Based on TiO2 Nanowire Array and Ultrasonic Spraying

Optimizing proton exchange membrane fuel cell performance at low-humidity via constructing additional anodic water-retaining membrane layer containing sulfonated multi-walled carbon nanotubes

Improvement of proton exchange membrane fuel cell performance in low-humidity conditions by adding hygroscopic agarose powder to the catalyst layer

Modifying the Catalyst Layer Using Polyvinyl Alcohol for the Performance Improvement of Proton Exchange Membrane Fuel Cells under Low Humidity Operations

Designing self-humidifying proton exchange membrane fuel cells by using patterned acid-alkaline hybrid cathodes

Preparation of a self-humidifying membrane electrode assembly for fuel cell and its performance analysis

Dual-functional phosphoric acid-loaded covalent organic framework for PEMFC self-humidification: Optimization on membrane electrode assembly

Designing Membrane Electrode Assembly for Weakly Humidity-Dependent Proton Exchange Membrane Fuel Cells

A Novel Self-Humidifying Membrane Electrode Assembly with Water Transfer Region for Proton Exchange Membrane Fuel Cells

Self-humidification of a PEM fuel cell using a novel Pt/SiO2/C anode catalyst

Low-platinum dissymmetric membrane electrode assemblies for fuel cells suitable for a variety of external humidification conditions

Preparation of an Integrated Membrane Electrode Assembly for Proton Exchange Membrane Fuel Cells Using a Novel Wet-Bonding Strategy

Effect of membrane deposition methods on the performance of membrane electrode assemblies

Novel self-humidifying MEA with water transfer region for PEM fuel cells

The buffer microporous layer improved water management for proton exchange membrane fuel cell at varying humidification

Single-walled carbon nanotube interlayer modified gas diffusion layers to boost the cell performance of self-humidifying proton exchange membrane fuel cells