Abstract:Organic-inorganic hybrid perovskites have attracted substantial attention due to their outstanding performance in solar energy conversion and optoelectronic applications. However, the poor stability of organic lead halide perovskites (APbX(3), A: organic cations; X: halide anions) hinders their practical application. Compositional engineering, optimizing the concentration of different A and/or X, is one of the most effective ways to enhance the stability of APbX(3). In particular, mixing formamidinium (FA) and methylammonium (MA) cations has been widely investigated. Here, we performed first-principles calculations to systematically investigate the structures and optical properties of FA(1-x)MA(x)PbI(3). We obtained several stable crystal structures of FA(1-x)MA(x)PbI(3) in the cubic phase for different ratios of FA and MA cations. By analyzing the structures of these mixed cation perovskites, we revealed that the lattice parameters decreased linearly with increasing concentration of MA cations, which was consistent with previous experimental results. For APbX(3) perovskites, the Goldschmidt tolerance factor has been shown to be an effective index for predicting the stability. The mixing of organic cations is an effective method for adjusting this factor and thus the stability of these perovskite materials. In this work, the formation energy difference (Delta E) was calculated and our results showed that mixing of FA and MA cations could increase the thermodynamic stability compared to pure FAPbI(3) and MAPbI(3). FA(0.5)MA(0.5)PbI(3) was found to be the most stable of all composites investigated. Furthermore, the band gap decreased with increasing proportion of FA cations, indicating an effective strategy for extending the absorption range of organic-inorganic hybrid perovskites into the infra-red region of the solar spectrum. By analyzing the Pb-I bond lengths for different FA : MA ratios, we showed that the decrease of band gap mainly comes from the increase of the maximum valence band energy. In addition, the effective masses were similar, irrespective of the cation mixture, indicating that the mixing of organic cations does not affect the carrier transport mechanism in this material. Density of states (DOS) analysis revealed that the DOS of valence band edge increased with increasing proportion of FA cations, enhancing transitions between the valence and conduction bands. Finally, detailed analysis of the optical absorption coefficients of all composition was performed; the absorption spectra were blue shifted with increasing MA cation concentration. These results demonstrated the possibility of controlling the optoelectronic properties of organometallic lead halide perovskites by mixing FA and MA cations and hence, further improving the efficiency of perovskite solar cells.

High‐Quality Mixed‐Organic‐Cation Perovskites from a Phase‐Pure Non‐stoichiometric Intermediate (fai)1−x‐pbi2 for Solar Cells

The intrinsic properties of FA((1-x))MA(x)PbI(3) perovskite single crystals

Mixed Cation FAxPEA1–xPbI3 with Enhanced Phase and Ambient Stability toward High‐Performance Perovskite Solar Cells

High-quality All-Inorganic CsPbI2Br Thin Films Derived from Phase-Pure Intermediate for Efficient Wide-Bandgap Perovskite Solar Cells

Mixed-Organic-Cation (FA)x(MA)1-xPbI3 Planar Perovskite Solar Cells with 16.48% Efficiency via a Low-Pressure Vapor-Assisted Solution Process

First-Principles Study of Mixed Cation Methylammonium-Formamidinium Hybrid Perovskite

Phase‐pure Α‐Fapbi3 Perovskite Solar Cells via Activating Lead‐Iodine Frameworks

CsI Pre-Intercalation in the Inorganic Framework for Efficient and Stable FA 1- x Cs x PbI 3 (Cl) Perovskite Solar Cells.

Mechanochemical synthesis of pure phase mixed-cation/anion (FAPbI<sub>3</sub>)<sub><i>x</i></sub>(MAPbBr<sub>3</sub>)<sub>1-<i>x</i ></sub> hybrid perovskite materials: compositional engineering and photovoltaic performance

Combined Precursor Engineering and Grain Anchoring Leading to MA‐free, Phase‐pure and Stable Α‐formamidinium Lead Iodide Perovskites for Efficient Solar Cells

Synergistic Effect of H+ and I− Oxidation Enables Long‐Term Stability of the Precursor Solutions and Enhanced Performance of FA‐Dominated Perovskite Solar Cells

Sequential Introduction of Cations Deriving Large-Grain Cs(X)Fa(1-X)Pbi(3) Thin Film for Planar Hybrid Solar Cells: Insight into Phase-Segregation and Thermal-Healing Behavior

Fabrication and Characterization of FA x Cs 1− x PbI 3 Polycrystal Perovskite Solar Cells

Synergistic Strategy of Rubidium Chloride Regulated Sno2and 4-Tert-butyl-benzylammonium Iodide Passivated Maxfa1-Xpbi3 for Efficient Mixed-Cation Perovskite Solar Cells

The compatibility of methylammonium and formamidinium in mixed cation perovskite: the optoelectronic and stability properties

Mixed-Organic-Cation Tin Iodide for Lead-Free Perovskite Solar Cells with an Efficiency of 8.12.

A Thermodynamically Favored Crystal Orientation in Mixed Formamidinium/Methylammonium Perovskite for Efficient Solar Cells

Regulating the crystalline phase of intermediate films enables FA 1− x MA x PbI 3 perovskite solar cells with efficiency over 22%

Resolving Mixed Intermediate Phases in Methylammonium-Free Sn–Pb Alloyed Perovskites for High-Performance Solar Cells

A Mixed-Cation Lead Iodide MA(1-x)EA(x)PbI(3) Absorber for Perovskite Solar Cells

A high stability, hole-conductor-free mixed organic cation pervoskite solar cells based on carbon counter electrode