Abstract:Nowadays, the MA-FA mixed-cation perovskite solar cells (PSCs), demonstrating much higher stability than that of single-cation MAPbI(3) or FAPbI(3), are still encountering a low-efficiency issue. The main reason is that there existing a lot of defects in SnO2 electron transport layers (ETLs) and perovskite absorbers. Herein, we develop a synergistic strategy of Rubidium Chloride (RbCl) doping and 4-tert-butylbenzylammonium iodide (tBBAI) passivation to fabricate high-performance MA(x)FA(1-x)PbI(3) mixed-cation PSCs. The alkali halide RbCl is first selected as a novel doping additive to regulate the film properties of SnO2 and perovskites. Research shows that the negative Cl- ions can combine with uncoordinated Sn4+ ions due to their strong bonding ability, which can passivate the oxygen-vacancy-related defects and enhance the charge transport of SnO2 ETLs. Meanwhile, the doped Rb+ and Cl- ions may diffuse into perovskite lattices to promote grain growth and reduce the defects of perovskites. Besides, we employ an organic halide salt tBBAI to passivate perovskites and suppress surface defects. Results of deep level transient spectroscopy (DLTS) indicate that SnO2 and SnO2-RbCl based devices have deeper hole traps and large trap densities (Delta E = 0.92 eV, N-T = 1.10 x 10(16) cm(-3); Delta E = 0.93 eV, N-T = 2.16 x 10(15) cm(-3)); while tBBAI-treated SnO2-RbCl-based devices own a shallower hole trap and a smaller trap density (Delta E = 0.72 eV, N-T = 2.44 x 10(13) cm(-3)); and the corresponding IPb and I-(MA/FA) antisite defeats are also identified. Therefore, our synergistic strategy is effectively able to reduce the defect density and suppress the non-radiative recombination. Consequently, the best-performance MA(0.85)FA(0.15)PbI(3) PSCs achieve an impressive power conversion efficiency (PCE) of 22.54% with a large open circuit voltage (V-oc) of 1.16 V, which are by far the highest values of MA(0.85)FA(0.15)PbI(3) mixed-cation PSCs.

A Mixed-Cation Lead Iodide MA(1-x)EA(x)PbI(3) Absorber for Perovskite Solar Cells

Mixed Cation FAxPEA1–xPbI3 with Enhanced Phase and Ambient Stability toward High‐Performance Perovskite Solar Cells

Effects of Formamidinium and Bromide Ion Substitution in Methylammonium Lead Triiodide Toward High-Performance Perovskite Solar Cells

Mixed-Organic-Cation (FA)x(MA)1-xPbI3 Planar Perovskite Solar Cells with 16.48% Efficiency via a Low-Pressure Vapor-Assisted Solution Process

Influence of Organic Cations on Intrinsic Properties of Lead Iodide Perovskite Solar Cells

Stable Pure Iodide MA0.95Cs0.05PbI3 Perovskite Toward Efficient 1.6 Ev Bandgap Photovoltaics.

The compatibility of methylammonium and formamidinium in mixed cation perovskite: the optoelectronic and stability properties

Synergistic Strategy of Rubidium Chloride Regulated Sno2and 4-Tert-butyl-benzylammonium Iodide Passivated Maxfa1-Xpbi3 for Efficient Mixed-Cation Perovskite Solar Cells

Trivalent Europium Doped CsCl Quantum Dots for MA‐free Perovskite Solar Cells with Inherent Bandgap through Lattice Strain Compensation

Design of Lead Hybrid Halide Perovskite for Solar Cells

Crystal Growth and Structural and Optical Characterizations of Mixed-Cation MA1-xCsxPbBr3 Halide Perovskite Solid Solutions

Lead-Free Mixed Tin and Germanium Perovskites for Photovoltaic Application

The intrinsic properties of FA((1-x))MA(x)PbI(3) perovskite single crystals

High‐Performance Photo–Absorber based on 2D Perovskites with Alternating Cations in the Interlayer Space: GA(MA)3M3I10

Photovoltaic Characteristics of CH3NH3PbI3 Perovskite Solar Cells Added with Ethylammonium Bromide and Formamidinium Iodide

Formamidinium lead triiodide perovskites with improved structural stabilities and photovoltaic properties obtained by ultratrace dimethylamine substitution

High Efficiency Quasi‐2D/3D Pb–Ba Perovskite Solar Cells via Phenethylammonium Chloride Addition

Mixed-Organic-Cation Tin Iodide for Lead-Free Perovskite Solar Cells with an Efficiency of 8.12.

Enhanced Perovskite Electronic Properties Via A-site Cation Engineering

Efficient MA-free Pb-Sn alloyed low-bandgap perovskite solar cells via surface passivation

Cesium-Containing Methylammonium Lead Iodide Light Absorber for Planar Perovskite Solar Cells.