Abstract:Interfacial trap-assisted non-radiative recombination and residual stress impede the further increase of power conversion efficiency (PCE) and stability of the methylammonium-free (MA-free) perovskite solar cells (PSCs). Here, we report an interfacial defect passivation and stress release strategy through employing the multi-active-site Lewis base ligand (i.e., (5-mercapto-1,3,4-thiadiazol-2-ylthio)acetic acid (MTDAA)) to modify the surface and grain boundaries (GBs) of MA-free perovskite films. Both experimental and theoretical results confirm strong chemical interactions between multiple active sites in the MTDAA molecule and undercoordinated Pb2+ at the surface or GBs of perovskite films. It is demonstrated theoretically that multi-active-site adsorption is more favorable thermodynamically as compared to single-active-site adsorption, regardless of PbI2 termination and formamidinium iodide (FAI) termination types. MTDAA modification results in much reduced defect density, increased carrier lifetime, and almost thoroughly released interfacial residual stress. Upon MTDAA passivation, the PCE is boosted from 20.26% to 21.92%. The unencapsulated device modified by MTDAA maintains 99% of its initial PCE after aging under the relative humidity range of 10–20% for 1776 h, and 91% after aging at 60 °C for 1032 h.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00794?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00794</a>.Experimental Section (including materials, device fabrication, and characterization), J–V curves, XRD patterns, UV–vis absorption spectra, Tauc plot, SEM images, FTIR spectra, PL spectra, Nyquist plots, equivalent circuit, Mott–Schottky plot, statistical diagrams of photovoltaic parameters, chemical structures of the single-active-active passivation molecules, stability data, photovoltaic performance of the devices based on different MA-free perovskite compositions, TRPL fitting results, summary of champion and average photovoltaic parameters of the devices modified by different concentrations of MTDAA, summary of photovoltaic performance of reported high-efficiency CsFA-based MA-free PSCs to date, and photovoltaic performance of the devices based on different modifiers (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00794/suppl_file/nz1c00794_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Trivalent Europium Doped CsCl Quantum Dots for MA‐free Perovskite Solar Cells with Inherent Bandgap through Lattice Strain Compensation

Over 24% efficient MA-free CsxFA1−xPbX3 perovskite solar cells

Constructing CsPbBr3 Cluster Passivated‐Triple Cation Perovskite for Highly Efficient and Operationally Stable Solar Cells

Ligand-assisted cation-exchange engineering for high-efficiency colloidal Cs1−xFAxPbI3 quantum dot solar cells with reduced phase segregation

Stable and High‐Efficiency Methylammonium‐Free Perovskite Solar Cells

Efficient MA-free Pb-Sn alloyed low-bandgap perovskite solar cells via surface passivation

Homogeneous Crystallization of MA-free, Wide-Bandgap Perovskite Films Via Self-Assembled Monolayer Capping for Laminated Silicon/perovskite Tandem Solar Cells

Strain Regulation and Defect Passivation of FA‐Based Perovskite Materials for Highly Efficient Solar Cells

CsI Pre-Intercalation in the Inorganic Framework for Efficient and Stable FA 1- x Cs x PbI 3 (Cl) Perovskite Solar Cells.

Synergistic Strategy of Rubidium Chloride Regulated Sno2and 4-Tert-butyl-benzylammonium Iodide Passivated Maxfa1-Xpbi3 for Efficient Mixed-Cation Perovskite Solar Cells

Suppressing charge recombination in a methylammonium-free wide-bandgap perovskite film for high-performance and stable perovskite solar cells

Band Engineering via Gradient Molecular Dopants for CsFA Perovskite Solar Cells

Numerical Simulation and Optimization of Highly Stable and Efficient Lead-Free Perovskite FA1−xCsxSnI3-Based Solar Cells Using SCAPS

Energy Level Alignment Regulation and Carrier Management in Perovskite Solar Cells with Various Bandgaps Using Tailored Metal‐Organic Frameworks

High-efficiency and stable FA 0.75 MA 0.25 SnI 3 perovskite solar cells with large-size crystal grains prepared by doping with multifunctional chloride salt

Stable and Efficient Methylammonium‐, Cesium‐, and Bromide‐Free Perovskite Solar Cells by In‐Situ Interlayer Formation

Interfacial Defect Passivation and Stress Release via Multi-Active-Site Ligand Anchoring Enables Efficient and Stable Methylammonium-Free Perovskite Solar Cells

Cs0.15FA0.85PbI3/CsxFA1 -Xpbi3 Core/Shell Heterostructure for Highly Stable and Efficient Perovskite Solar Cells

A-site Assisted Perovskite Crystallization Via Ion-Exchange MOFs for High Efficient and Stable Perovskite Solar Cells

Spacer Cation Tuning Enables Vertically Oriented and Graded Quasi‐2D Perovskites for Efficient Solar Cells