Abstract:Comprehensive Summary Recently, hybrid organic–inorganic perovskite materials have drawn widespread attention because of their outstanding optoelectrical properties (i.e., high absorption coefficient, long carrier diffusion distance), hence they are suitable light‐absorbing materials for photovoltaic application. Among all perovskite materials, formamidinium lead iodide (FAPbI3) based solar cells exhibit impressive power conversion efficiency (PCE) at laboratory stage, showing great potential to compete with silicon‐based solar cell. However, FAPbI3 still suffers from poor phase stability which is the prior problem that needs to be addressed before its further commercialization. To be precise, the photoactive phase (α phase) is thermodynamically metastable at room temperature, which not only makes α phase tend to transform into photoinactive phase (δ phase), but also causes competitive crystallization between two phases during the film preparation process, making it hard to fabricate pure α‐FAPbI3 films. In our review, we summarized key factors that are vital for obtaining high‐quality FAPbI3 perovskite thin films and enhancing the stability of FAPbI3 photoactive phase. First of all, precursor solution stability is of great importance since the conditions of precursor solution determine the nucleation and crystal growth process of perovskite. By introducing coordinating additives, using FAPbI3 single crystal as raw material or applying co‐solution strategy, the impurities formed by side reaction during precursor solution aging can be effectively suppressed, thus the stability of FAPbI3 solution can be greatly prolonged. Second, the crystallization kinetics of FAPbI3 have been systematically manipulated to obtain dense and large grain size perovskite films. Through introducing intermediate phase, regulating the surface energy, and retarding the crystal growth of FAPbI3 in crystallization process, not only films without pinholes and fewer grain boundaries can be obtained, the pre‐formed δ phase at room temperature can also be well‐suppressed, thus high‐quality α‐FAPbI3 films can be obtained. Third, how to thermodynamically enhance the phase stability of acquired FAPbI3 film has been extensively studied. The Gibbs free energy of FAPbI3 photoactive phase can be reduced through composition engineering, dimension engineering and external additives engineering, hence the phase transition barrier from α phase to δ phase has been significantly improved, which further enhance the phase stability of α‐ FAPbI3. Lastly, we pointed out challenges of each method and proposed potential applications of mentioned strategies on improving the stability of all kinds of perovskite materials, thus further boost the commercialization of perovskite solar cell devices. This article is protected by copyright. All rights reserved.

Formamidinium lead triiodide perovskites with improved structural stabilities and photovoltaic properties obtained by ultratrace dimethylamine substitution

First-Principles Study of Mixed Cation Methylammonium-Formamidinium Hybrid Perovskite

The key role of methylenediammonium and tetrahydrotriazinium in the phase stability of FAPbI3

Formamidinium Incorporates into Rb‐based Non‐perovskite Phases in Solar Cell Formulations

Dimethylammonium additives alter both vertical and lateral composition in halide perovskite semiconductors

Mixed Cation FAxPEA1–xPbI3 with Enhanced Phase and Ambient Stability toward High‐Performance Perovskite Solar Cells

Toward stabilization of formamidinium lead iodide perovskites by defect control and composition engineering

Surface Ligand Management for Stable FAPbI3 Perovskite Quantum Dot Solar Cells

Efficient and Stable Perovskite Solar Cells by Fluorinated Ionic Liquid–Induced Component Interaction

Phase‐pure Α‐Fapbi3 Perovskite Solar Cells via Activating Lead‐Iodine Frameworks

Stabilizing formamidinium lead triiodide α-phase with diamine cations for perovskite solar cells

Mechanism of the Dimethylammonium Cation in Hybrid Perovskites for Enhanced Performance and Stability of Printable Perovskite Solar Cells

Defect suppression and energy level alignment in formamidinium-based perovskite solar cells

Stabilization of FAPbI3 with Multifunctional Alkali‐Functionalized Polymer

Strain Regulation via Pseudo Halide‐Based Ionic Liquid toward Efficient and Stable α‐FAPbI3 Inverted Perovskite Solar Cells

The compatibility of methylammonium and formamidinium in mixed cation perovskite: the optoelectronic and stability properties

Synergetic Electrostatic and Steric Effects in α‐FAPbI3 Single Crystals For X‐Ray Detection and Imaging

High-Performance Formamidinium-Based Perovskite Solar Cells Via Microstructure-Mediated Δ-to-α Phase Transformation

Protic Amine Carboxylic Acid Ionic Liquids Additives Regulate α‐FAPbI 3 Phase Transition for High Efficiency Perovskite Solar Cells

Advances to Stabilize Photoactive Phase of FAPbI3 Perovskite

Stable α/δ phase junction of formamidinium lead iodide perovskites for enhanced near-infrared emission.