Abstract:Comprehensive Summary Recently, hybrid organic–inorganic perovskite materials have drawn widespread attention because of their outstanding optoelectrical properties (i.e., high absorption coefficient, long carrier diffusion distance), hence they are suitable light‐absorbing materials for photovoltaic application. Among all perovskite materials, formamidinium lead iodide (FAPbI3) based solar cells exhibit impressive power conversion efficiency (PCE) at laboratory stage, showing great potential to compete with silicon‐based solar cell. However, FAPbI3 still suffers from poor phase stability which is the prior problem that needs to be addressed before its further commercialization. To be precise, the photoactive phase (α phase) is thermodynamically metastable at room temperature, which not only makes α phase tend to transform into photoinactive phase (δ phase), but also causes competitive crystallization between two phases during the film preparation process, making it hard to fabricate pure α‐FAPbI3 films. In our review, we summarized key factors that are vital for obtaining high‐quality FAPbI3 perovskite thin films and enhancing the stability of FAPbI3 photoactive phase. First of all, precursor solution stability is of great importance since the conditions of precursor solution determine the nucleation and crystal growth process of perovskite. By introducing coordinating additives, using FAPbI3 single crystal as raw material or applying co‐solution strategy, the impurities formed by side reaction during precursor solution aging can be effectively suppressed, thus the stability of FAPbI3 solution can be greatly prolonged. Second, the crystallization kinetics of FAPbI3 have been systematically manipulated to obtain dense and large grain size perovskite films. Through introducing intermediate phase, regulating the surface energy, and retarding the crystal growth of FAPbI3 in crystallization process, not only films without pinholes and fewer grain boundaries can be obtained, the pre‐formed δ phase at room temperature can also be well‐suppressed, thus high‐quality α‐FAPbI3 films can be obtained. Third, how to thermodynamically enhance the phase stability of acquired FAPbI3 film has been extensively studied. The Gibbs free energy of FAPbI3 photoactive phase can be reduced through composition engineering, dimension engineering and external additives engineering, hence the phase transition barrier from α phase to δ phase has been significantly improved, which further enhance the phase stability of α‐ FAPbI3. Lastly, we pointed out challenges of each method and proposed potential applications of mentioned strategies on improving the stability of all kinds of perovskite materials, thus further boost the commercialization of perovskite solar cell devices. This article is protected by copyright. All rights reserved.

Stabilization of FAPbI3 with Multifunctional Alkali‐Functionalized Polymer

Surface Ligand Management for Stable FAPbI3 Perovskite Quantum Dot Solar Cells

A Polymerization‐Assisted Grain Growth Strategy for Efficient and Stable Perovskite Solar Cells

Improved Crystallinity and Self-Healing Effects in Perovskite Solar Cells Via Functional Incorporation of Polyvinylpyrrolidone

Reconstructing Subsurface Lattice for Stable Perovskite Photovoltaics

Crystal Growth Regulation of α‐FAPbI3 Perovskite Films for High‐Efficiency Solar Cells with Long‐Term Stability

Complex Additive‐Assisted Crystal Growth and Phase Stabilization of α‐FAPbI3 Film for Highly Efficient, Air‐Stable Perovskite Photovoltaics

A Self-Assembled 3D/0D Quasi-Core-Shell Structure As Internal Encapsulation Layer for Stable and Efficient FAPbI3 Perovskite Solar Cells and Modules

Strain Regulation via Pseudo Halide‐Based Ionic Liquid toward Efficient and Stable α‐FAPbI3 Inverted Perovskite Solar Cells

Advances to Stabilize Photoactive Phase of FAPbI3 Perovskite

A Self‐Assembled 3D/0D Quasi‐Core–Shell Structure as Internal Encapsulation Layer for Stable and Efficient FAPbI 3 Perovskite Solar Cells and Modules

Stabilizing α-Phase FAPbI 3 Perovskite Induced by an Ordered Solvated Quasi-Crystalline PbI 2

Regulating the Crystallization of FAPbI3‐Based Perovskite with a Furan Substituted Ethylammonium Additive for Achieving Highly Efficient Solar Cells

Efficient and Stable Perovskite Solar Cells by Fluorinated Ionic Liquid–Induced Component Interaction

Stable FAPbI 3 Perovskite Solar Cells via Alkylammonium Chloride-Mediated Crystallization Control

Formamidinium lead triiodide perovskites with improved structural stabilities and photovoltaic properties obtained by ultratrace dimethylamine substitution

Reducing surficial and interfacial defects by thiocyanate ionic liquid additive and ammonium formate passivator for efficient and stable perovskite solar cells

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

PbI6 Octahedra Stabilization Strategy Based on π‐π Stacking Small Molecule Toward Highly Efficient and Stable Perovskite Solar Cells

Synergetic Co‐Modulation of Crystallization and Co‐Passivation of Defects for FAPbI 3 Perovskite Solar Cells

Tailoring the Interface with a Multifunctional Ligand for Highly Efficient and Stable FAPbI3 Perovskite Solar Cells and Modules