Abstract:Perovskite solar cells (PSCs) have been developed as a promising photovoltaic technology because of their excellent photovoltaic performance. However, interfacial recombination and charge carrier transport losses at the surface greatly limit the performance and stability of PSCs. In this work, the fabrication of high-quality PSCs based on methylammonium lead iodide with excellent ambient stability is reported. An anionic surfactant, sodium dodecylbenzene sulfonate (SDBS), is introduced to simultaneously passivate the defect states and stabilize the cubic phase of the perovskite film. The SDBS located at grain boundaries and the surface of the active layer can effectively passivate under-coordinated lead ions and protect the perovskite components from water-induced degradation. As a result, a champion power conversion efficiency (PCE) of 19.42% is achieved with an open-circuit voltage (VOC) of 1.12 V, a short-circuit current (JSC) of 23.23 mA cm–2, and a fill factor (FF) of 74% in combination with superior moisture stability. The SDBS-passivated devices retain 80% of their initial average PCE after 2112 h of storage under ambient conditions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c14732?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c14732</a>.Device fabrication, GIWAXS characterization, device characterization, contact angle measurements, spectroscopy data, SEM data, GIWAXS data, and XRD data (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14732/suppl_file/am0c14732_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Reducing surficial and interfacial defects by thiocyanate ionic liquid additive and ammonium formate passivator for efficient and stable perovskite solar cells

Defect Passivation in CH3NH3PbI3 Films Using Alkali Metal Fluoride Additives for Highly Efficient Perovskite Solar Cells

Cation Engineering for Effective Defect Passivation to Improve Efficiency and Stability of FA0.5MA0.5PbI3Perovskite Solar Cells

Tailoring Defect Passivation for Efficient and Stable Perovskite Solar Cells via an Ionic Liquid Additive

Molecularly Tailored Surface Defect Modifier for Efficient and Stable Perovskite Solar Cells

Perovskite Surface Passivation Using Thiophene-Based Small Molecules for Efficient and Stable Solar Cells

Organic Fluorine-Based Trifluoroethyl Methacrylate As Effective Defect Passivators Enabling High-Efficiency and Stable Perovskite Solar Cells

Simultaneously Mitigating Anion and Cation Defects Both in Bulk and Interface for High‐Effective Perovskite Solar Cells

Synergistic Interface Layer Optimization and Surface Passivation with Fluorocarbon Molecules toward Efficient and Stable Inverted Planar Perovskite Solar Cells

Enhancing the Performance of Perovskite Solar Cells by Introducing 4-(Trifluoromethyl)-1H-imidazole Passivation Agents

Sodium Dodecylbenzene Sulfonate Interface Modification of Methylammonium Lead Iodide for Surface Passivation of Perovskite Solar Cells

Surface Defects Passivation with Organic Salt for Highly Stable and Efficient Lead-Free Cs 3 Sb 2 I 9 Perovskite Solar Cells

Interfacial defect passivation by multiple-effect molecule for efficient and stable perovskite solar cells

Ionic Liquid‐Assisted Crystallization and Defect Passivation for Efficient Perovskite Solar Cells with Enhanced Open‐Circuit Voltage

Enhancing the performance of perovskite solar cells through simple bilateral active site molecule assisted surface defect passivation

Zwitterionic ionic liquid synergistically induces interfacial dipole formation and traps state passivation for high-performance perovskite solar cells

Synergistic effect of surface active agent in defect passivation by for ambient air-synthesized halide perovskite solar cells

Multifunctional Organic Potassium Salt Additives as the Efficient Defect Passivator for High‐Efficiency and Stable Perovskite Solar Cells

Reduced defects and enhanced Vbi in perovskite absorbers through synergetic passivating effect using 4-methoxyphenylacetic acid

Interfacial Defect Passivation Effect of N -Methyl- N -(thien-2-ylmethyl)amine for Highly Effective Perovskite Solar Cells

Multifunctional Thiophene-Based Interfacial Passivating Layer for High-Performance Perovskite Solar Cells