Abstract:Perovskite solar cells (PSCs) show great potential for next-generation photovoltaics, due to their excellent optical and electrical properties. However, defects existing inside the perovskite film impair both the performance and stability of the device. Uncoordinated Pb2+, uncoordinated I , and metallic Pb (Pb-0) are the main defects occur during perovskite film preparation and device operation, due to the volatilization of organic cationic components. Passivating these defects is a desirable task, because they are non-radiative recombination centers that cause open-circuit voltage (V-OC) loss and degradation of the perovskite layer. Herein, the multifunctional bioactive compound dopamine (DA) is introduced for the first time to control the perovskite film formation and passivate the uncoordinated Pb2+ defects via Lewis acid-base interactions. The Pb-0 and I defects are effectively suppressed by the DA treatment. At the same time, the DA treatment results in a stronger crystal orientation along the (110) plane and upshifts the valence band of perovskite closer to the highest occupied molecular orbital (HOMO) of the hole transport layer (2,2',7,7'-tetrakis(N,N'-di-pmethoxyphenylamine)-9,9'-spirobifluorene, spiro-OMeTAD), which is beneficial for charge separation and transport processes. Consequently, the stability of MAPbI(3) (MA = CH3NH3) PSC5 prepared with the DA additive (especially the thermal stability) is effectively improved due to the better crystallinity and lower number of defect trap states of the perovskite film. The optimized MAPbI(3) PSC5 maintain approximately 90% of their original power conversion efficiency (PCE) upon annealing at 85 degrees C for 120 h. The best performance triple-cation perovskite (CS0.05(FA(0.83)MA(0.17))(0.95)Pb(I0.83Br0.17)(3)) (FA = formamidinium) solar cell with ITO/SnO2/CS0.05(FA(0.83)MA(0.17))(0.95)Pb(I0.83Br0.17)(3):DA/spiro-OMeTAD/MoO3/Ag (ITO = indium tin oxide) structure shows a PCE of 21.03% with negligible hysteresis, which is dramatically enhanced compared to that of the control device (18.31%). Therefore, this work presents a simple and effective way to improve the efficiency and stability of PSCs by DA treatment. (C) 2020 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by ELSEVIER B.V. and Science Press. All rights reserved.

Synergistic Strategy of Rubidium Chloride Regulated Sno2and 4-Tert-butyl-benzylammonium Iodide Passivated Maxfa1-Xpbi3 for Efficient Mixed-Cation Perovskite Solar Cells

Efficient MA-free Pb-Sn alloyed low-bandgap perovskite solar cells via surface passivation

Synergistic Transition Metal Ion Co-Doping and Multiple Functional Additive Passivation for Realizing 25.30% Efficiency Perovskite Solar Cells

Synergistical Transition Metal Ion Co-Doping and Multiple Functional Additive Passivation for Realizing 25.30% Efficiency Perovskite Solar Cells

Dual Strategy Based on Quantum Dot Doping and Phenylethylamine Iodide Surface Modification for High-Performance and Stable Perovskite Solar Cells

Constructing CsPbBr3 Cluster Passivated‐Triple Cation Perovskite for Highly Efficient and Operationally Stable Solar Cells

Bottom-up Holistic Carrier Management Strategy Induced Synergistically by Multiple Chemical Bonds to Minimize Energy Losses for Efficient and Stable Perovskite Solar Cells

A Lewis Base-Assisted Passivation Strategy Towards Highly Efficient And Stable Perovskite Solar Cells

Multifunctional Dopamine-Assisted Preparation of Efficient and Stable Perovskite Solar Cells

Reducing surficial and interfacial defects by thiocyanate ionic liquid additive and ammonium formate passivator for efficient and stable perovskite solar cells

Lattice Strain Regulation and Halogen Vacancies Passivation Enable High-Performance Formamidine-Based Perovskite Solar Cells

Synergetic Excess PbI2 and Reduced Pb Leakage Management Strategy for 24.28% Efficient, Stable and Eco‐Friendly Perovskite Solar Cells

Synchronous Surface Reconstruction and Defect Passivation for High-Performance Inorganic Perovskite Solar Cells.

Organic Fluorine-Based Trifluoroethyl Methacrylate As Effective Defect Passivators Enabling High-Efficiency and Stable Perovskite Solar Cells

Multistage Regulation Strategy via Fluorine‐Rich Small Molecules for Realizing High‐Performance Perovskite Solar Cells

Suppressing Ion Migration by Synergistic Engineering of Anion and Cation Toward High-Performance Inverted Perovskite Solar Cells and Modules

Rubidium Halide Additive Engineering for Efficient and Stable Bifacial Perovskite Solar Cells

Synergistic Effect of Fluorinated Passivator and Hole Transport Dopant Enables Stable Perovskite Solar Cells with an Efficiency Near 24%

BT-MA 0.6 FA 0.4 PbI 3– x Cl x Unsymmetrical Perovskite for Solar Cells with Superior Stability and PCE over 23%

High-efficiency and stable FA 0.75 MA 0.25 SnI 3 perovskite solar cells with large-size crystal grains prepared by doping with multifunctional chloride salt

Synergistic Effect of H+ and I− Oxidation Enables Long‐Term Stability of the Precursor Solutions and Enhanced Performance of FA‐Dominated Perovskite Solar Cells