Abstract:The power conversion efficiency of perovskite solar cells (PSCs) has increased dramatically over the past decade, reaching more than 26%. With such high efficiency, PSCs could become one of the most important commercial alternatives to silicon‐based solar cells in the near future. However, the inconsistency of PSC operation over time is the key issue restricting its commercial application. One of the most common means of improving the overall stability of PSCs is the introduction of additives with specific functional groups to extend their useful life. Here we compare the performance and stability of MAPbI3‐based PSCs with additions of either benzoic acid (0F‐B), fluorinated benzoic acids (4‐fluorobenzoic acid (1F‐B), or 2,3,4,5,6‐pentafluorobenzoic acid (5F‐B)) in the perovskite active layer. These additives, upon interacting with the perovskite precursors, chelate onto lead ions and form hydrogen bond with methyl ammonium ions. These combined interactions result in an increased activation energy for nucleation of perovskite crystals, thereby, increased crystal size, reduced defect formation, improved electronic properties, as well as reduced ion migration. As a result, PSCs added with largest fluorine substitution of 5F‐B achieve the highest efficiency of 20.50% with a narrow PCE distribution compared to that of PSC devices added with 1F‐B (19.25%), 0F‐B (18.80%) and pristine devices (18.53%). Notably, 5F‐B added PSCs retain 80% of their initial PCE after ∽100 days humidity test (at 25 °C and 50 RH%), 30 days thermal stability test (at 85 °C in nitrogen environment), and 12 days light illumination test (continuous simulated solar radiation). Therefore, 5F‐B added PSCs synergistically achieve the highest performance and remain very stable under constant heat, humidity, or light illumination conditions for sustained energy‐harvesting applications in the future. TOC: This study focuses on the impacts of benzoic acid and its fluorinated derivatives functioning as effective passivation additives for methyl ammonium lead iodide (MAPbI3) perovskite solar cells. These additives synergistically passivate the perovskite layer, resulting in improved crystallinity and surface morphology, leading to an increased efficiency. Moreover, this approach enhances the long‐term stability of the architected solar cells, rendering them more suitable for future commercial applications. This article is protected by copyright. All rights reserved.

Synergistic Effect of H+ and I− Oxidation Enables Long‐Term Stability of the Precursor Solutions and Enhanced Performance of FA‐Dominated Perovskite Solar Cells

Reconstructing Subsurface Lattice for Stable Perovskite Photovoltaics

Regulating the Crystallization of FAPbI3‐Based Perovskite with a Furan Substituted Ethylammonium Additive for Achieving Highly Efficient Solar Cells

Bridging‐Solvent Strategy for Quasi‐Single‐Crystal Perovskite Films and Stable Solar Cells

High-efficiency and thermally stable FACsPbI3 perovskite photovoltaics

Strain Regulation via Pseudo Halide‐Based Ionic Liquid toward Efficient and Stable α‐FAPbI3 Inverted Perovskite Solar Cells

Mixed-Organic-Cation (FA)x(MA)1-xPbI3 Planar Perovskite Solar Cells with 16.48% Efficiency via a Low-Pressure Vapor-Assisted Solution Process

Over 24% efficient MA-free CsxFA1−xPbX3 perovskite solar cells

Crystal Growth Regulation of α‐FAPbI3 Perovskite Films for High‐Efficiency Solar Cells with Long‐Term Stability

Passivating Defects via Retarding the Reaction Rate of FAI and PbI2 Enables Stable Perovskite Solar Cells

Synergistic Enhancement of Stability and Performance for Perovskite Solar Cells Using Fluorinated Benzoic Acids as Additives

Complex Additive‐Assisted Crystal Growth and Phase Stabilization of α‐FAPbI3 Film for Highly Efficient, Air‐Stable Perovskite Photovoltaics

Suppressing Ion Migration by Synergistic Engineering of Anion and Cation towards High‐Performance Inverted Perovskite Solar Cells and Modules

Optimization of Α-Fapbi3 Crystallization by Intermediate Compounds Transformation for Efficient and Stable Perovskite Solar Cells

Laser Manufactured Nano‐MXenes with Tailored Halogen Terminations Enable Interfacial Ionic Stabilization of High Performance Perovskite Solar Cells

Stabilizing precursor solution and controlling crystallization kinetics simultaneously for high‐performance perovskite solar cells

Synergistic Crystallization and Passivation by a Single Molecular Additive for High-Performance Perovskite Solar Cells

Mixed Cation FAxPEA1–xPbI3 with Enhanced Phase and Ambient Stability toward High‐Performance Perovskite Solar Cells

Cs0.15FA0.85PbI3/CsxFA1 -Xpbi3 Core/Shell Heterostructure for Highly Stable and Efficient Perovskite Solar Cells

Advancements in Perovskite Solar Cell Efficiency Through Blade Coating Techniques and Post-Treatment Optimization

Enhancing the Performance and Stability of Perovskite Solar Cells through the Introduction of the Multifunctional Additive 5‐Amino‐2‐Fluorobenzoic Acid