Abstract:For perovskite based on a two‐step method, N‐methylpyrrolidone (NMP) is doped into the PbI2 solution to obtain a stable and homogeneous PbI2‐NMP complex. The interaction between NMP and FAI made it a bridge to promote the reaction between PbI2 and FAI, leading to (001)‐oriented quasi‐single‐crystal perovskite films with carrier lifetime of 1.5 μs and grain size larger than 3 μm. Solar cells exhibit an efficiency of 24.1% with working stability of T96 = 300 h. Controllable fabrication of formamidinium (FA)‐based perovskite solar cells (PSCs) with both high efficiency and long‐term stability is the key to their further commercialization. However, the diversity of PbI2 complexes and perovskite compositions usually leads to light sensitive PbI2 residues and phase impurities in the film, which can accelerate the device degradation. Here, the crystallization kinetics of FA‐based perovskite films are studied and a bridging‐solvent strategy is proposed to modulate the reaction kinetics between PbI2 and ammonium salts by prohibiting the formation of undesired intermediates. N‐methylpyrrolidone (NMP) solvent is introduced into the PbI2 precursor solution to obtain stable and homogeneous PbI2‐NMP complex films. The strong interaction between NMP and formamidinium iodide (FAI) molecules promotes the conversion from PbI2‐NMP into (001)‐oriented quasi‐single‐crystal perovskite films with negligible impurities, long carrier lifetime of 1.5 μs and a large grain size of 3 μm. The optimized PSCs exhibit a high power conversion efficiency of 24.1%, as well as superior shelf stability which maintains 95% initial efficiency after storage in air for 1200 h (T95 = 1200 h), and operating stability with T96 = 300 h under continuous working at the maximum power point. This work offers a simple and reproducible method for fabricating phase‐pure and uniaxially oriented perovskite films.

Regulating the crystalline phase of intermediate films enables FA 1− x MA x PbI 3 perovskite solar cells with efficiency over 22%

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Modulation of Nucleation and Crystallization in PbI2 Films Promoting Preferential Perovskite Orientation Growth for Efficient Solar Cells

Over 24% efficient MA-free CsxFA1−xPbX3 perovskite solar cells

CsI Pre-Intercalation in the Inorganic Framework for Efficient and Stable FA 1- x Cs x PbI 3 (Cl) Perovskite Solar Cells.

Controlling the Intermediate Phase to Improve the Crystallinity and Orientation of Cs3Sb2ClxI9‐x Films for Efficient Solar Cells

A Thermodynamically Favored Crystal Orientation in Mixed Formamidinium/Methylammonium Perovskite for Efficient Solar Cells

Regulating the Crystallization of FAPbI3‐Based Perovskite with a Furan Substituted Ethylammonium Additive for Achieving Highly Efficient Solar Cells

CsPb2Br5 assisted direct crystallization of 3D perovskite phase for highly efficient and stable solar cells

Fabrication and Characterization of FA x Cs 1− x PbI 3 Polycrystal Perovskite Solar Cells

Zwitterion-Stabilizing Scalable Bladed -Phase Cs<sub>0.1</sub>FA<sub>0.9</sub>PbI<sub>3</sub> Films for Efficient Inverted Planar Perovskite Solar Cells

Bridging‐Solvent Strategy for Quasi‐Single‐Crystal Perovskite Films and Stable Solar Cells

Resolving Mixed Intermediate Phases in Methylammonium-Free Sn–Pb Alloyed Perovskites for High-Performance Solar Cells

Highly Efficient (110) Orientated FA‐MA Mixed Cation Perovskite Solar Cells Via Functionalized Carbon Nanotube and Methylammonium Chloride Additive

Intercalation Crystallization of Phase-Pure Α-Hc(nh2)2pbi3upon Microstructurally Engineered PbI2thin Films for Planar Perovskite Solar Cells

Intermediate Phase Modification Enables High‐Performance Iodine‐Rich Inorganic Perovskite Solar Cells with 3000‐Hour Stability

High-efficiency and thermally stable FACsPbI3 perovskite photovoltaics

Efficient and Stable Wide‐Bandgap Perovskite Solar Cells Derived from a Thermodynamic Phase‐Pure Intermediate

Regulating the Perovskite Crystallization Dynamics Via Dual Modulation Strategy for Performance Enhancement of Perovskite Solar Cells

Controlling Intermediate Phase Formation to Enhance Photovoltaic Performance of Inverted FA-Based Perovskite Solar Cells

Combined Precursor Engineering and Grain Anchoring Leading to MA‐free, Phase‐pure and Stable Α‐formamidinium Lead Iodide Perovskites for Efficient Solar Cells