Abstract:The mechanical response of UACS laminates under compressive and progressive crushing load was numerically analyzed. The compressive damage propagation of UACS laminates with different slit patterns in 0° layer was demonstrated. The effect of different slit patterns on inhibiting delamination propagation and increasing energy absorption of UACS laminates under progressive crushing load was numerically analyzed. The outstanding mechanical performance and flowability of unidirectionally arrayed chopped strands laminates (UACS) give them an advantage in the manufacture of engineering structures with complex geometries. In this research, the mechanical response of UACS laminates with bi‐angled slits and staggered slits under quasi‐static compression and progressive crushing loads is numerically analyzed for the first time. The aim is to clarify the damage mechanism of UACS laminates under compressive and crushing load. Simulation results reveal that the compressive strength of [90/0]4s UACS laminates with bi‐angled slits is 635.9 MPa, with an error of 4.2% compared to experimental data. For the stacking sequence of [0/90]4s, the strength is measured as 581.96 MPa with a 5% error. Proposed finite element model could accurately describe the mechanical properties of UACS laminates. Additionally, the progressive crushing response is in good agreement with the experimental data, the error in energy absorption for [90/0]4s UACS laminates with bi‐angled slits is noted at 7% compared to experimental values. It has been demonstrated that bi‐angled slits significantly contribute in restraining the propagation of delamination and improving the amount of energy absorption of UACS laminates. Highlights The mechanical response of UACS laminates under compressive and progressive crushing load was numerically analyzed. The compressive damage propagation of UACS laminates with different slit patterns in 0° layer was demonstrated. The effect of different slit patterns on inhibiting delamination propagation and increasing energy absorption of UACS laminates under progressive crushing load was numerically analyzed.

Progressive failure analysis of the fiber metal laminates based on chopped carbon fiber strands

Micro Failure Analysis of Fiber Metal Laminates

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Progressive failure analysis of 2D woven composites at the meso-micro scale

Investigation on the Compressive Mechanical Properties of Ultra-Thick CFRP Laminates

Experimental and numerical investigation of the damage propagation in regularly arrayed short fiber reinforced composite laminates under low‐velocity impact

Finite element analysis on the compression and crush responses of laminates with unidirectionally arrayed chopped strand in 0° plies

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Damage Monitoring of Regularly Arrayed Short-Fiber-Reinforced Composite Laminates under Tensile Load Based on Acoustic Emission Technology

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

Collaborative Model in Brain-Computer Integration

Characterization of progressive damage behaviour and failure mechanism of carbon fibre reinforced DP590 laminates

Open-hole Tensile Progressive Damage and Failure Prediction of Carbon Fiber-Reinforced PEEK–titanium Laminates

A progressive damage model for carbon fiber-reinforced polymer laminates subjected to fastener pull-through failure

Music and health.

Mechanical response and critical failure mechanism characterization of notched carbon fiber reinforced polymer laminate subjected to tensile loading

Progressive fracture analysis of the open-hole composite laminates: experiment and simulation

Characterizing and predicting the tensile mechanical behavior and failure mechanisms of notched FMLs—Combined with DIC and numerical techniques

Progressive Failure Analysis of Carbon Fiber/epoxy Composite Laminates Using Continuum Damage Mechanics

3D FEA Modelling of Laminated Composites in Bending and Their Failure Mechanisms

Progressive Damage Behaviour Analysis and Comparison with 2D/3D Hashin Failure Models on Carbon Fibre-Reinforced Aluminium Laminates