Abstract:The mechanical response of UACS laminates under compressive and progressive crushing load was numerically analyzed. The compressive damage propagation of UACS laminates with different slit patterns in 0° layer was demonstrated. The effect of different slit patterns on inhibiting delamination propagation and increasing energy absorption of UACS laminates under progressive crushing load was numerically analyzed. The outstanding mechanical performance and flowability of unidirectionally arrayed chopped strands laminates (UACS) give them an advantage in the manufacture of engineering structures with complex geometries. In this research, the mechanical response of UACS laminates with bi‐angled slits and staggered slits under quasi‐static compression and progressive crushing loads is numerically analyzed for the first time. The aim is to clarify the damage mechanism of UACS laminates under compressive and crushing load. Simulation results reveal that the compressive strength of [90/0]4s UACS laminates with bi‐angled slits is 635.9 MPa, with an error of 4.2% compared to experimental data. For the stacking sequence of [0/90]4s, the strength is measured as 581.96 MPa with a 5% error. Proposed finite element model could accurately describe the mechanical properties of UACS laminates. Additionally, the progressive crushing response is in good agreement with the experimental data, the error in energy absorption for [90/0]4s UACS laminates with bi‐angled slits is noted at 7% compared to experimental values. It has been demonstrated that bi‐angled slits significantly contribute in restraining the propagation of delamination and improving the amount of energy absorption of UACS laminates. Highlights The mechanical response of UACS laminates under compressive and progressive crushing load was numerically analyzed. The compressive damage propagation of UACS laminates with different slit patterns in 0° layer was demonstrated. The effect of different slit patterns on inhibiting delamination propagation and increasing energy absorption of UACS laminates under progressive crushing load was numerically analyzed.

Finite element analysis on the compression and crush responses of laminates with unidirectionally arrayed chopped strand in 0° plies

Experimental and numerical investigation of the damage propagation in regularly arrayed short fiber reinforced composite laminates under low‐velocity impact

Investigation on the Compressive Mechanical Properties of Ultra-Thick CFRP Laminates

Research on Low-Velocity Impact Response of Novel Short-Fiber-Reinforced Composite Laminates

Damage Monitoring of Regularly Arrayed Short-Fiber-Reinforced Composite Laminates under Tensile Load Based on Acoustic Emission Technology

Experimental Investigation of Z-pin Insertion Angles on the Mechanical Behavior and Failure Mechanism of Compression after Impact for CFRP Laminates

Progressive Damage Behavior of Composite L‐stiffened Structures with Initial Delamination Defects under Uniaxial Compression: Experimental and Numerical Investigations

Progressive Failure Analysis of Composite Laminates Subjected to Transverse Loading with Augmented Finite Element Method

A Failure Mechanism Based Model for Numerical Modeling the Compression-after-impact of Foam-Core Sandwich Panels

Experimental and Numerical Analyses of Stiffened Composite Panels with Delamination under a Compressive Load

Crushing Behaviors of Unidirectional Carbon Fiber Reinforced Plastic Composites under Dynamic Bending and Axial Crushing Loading

Numerical Investigation on Behaviors of Composite Laminates with Initial Delamination Defects under Impact and Compression after Impact

Experimental and numerical simulation study on Near-edge/On-edge Low-Velocity impact and residual compressive strength of T300/69 laminates

Progressive fracture analysis of the open-hole composite laminates: experiment and simulation

Finite element simulation of axial crushing of flat and C-channel composite coupons using a modified mesomodel

Progressive damage analysis of green composite laminates subjected to in-plane crashworthiness

The Compressive Behavior of CFRP Laminates with Delamination of Different Shapes Using Numerical and Experimental Approaches

Damage and residual compressive strength of multi-layer composite laminates after low velocity impact

Finite element analysis on impact response and damage mechanism of composite laminates under single and repeated low-velocity impact

Development of a Numerical Material Model for Axial Crushing Mechanical Characterization of Woven CFRP Composites

Analysis of the crushing behaviors of woven carbon fiber reinforced plastic hat section component under dynamic bending and axial crushing loading