Abstract:Electrowetting-on-dielectric (EWOD) technology has been considered as a promising candidate for digital microfluidic (DMF) applications due to its outstanding flexibility and integrability. The dielectric layer with a hydrophobic surface is the key element of an EWOD device, determining its driving voltage, reliability, and lifetime. Hereby, inspired by the ionic-liquid-filled structuring polymer with high capacitance independent on thickness, namely ion gel (IG), we develop a polymer (P)-ion gel-amorphous fluoropolymer, namely, PIGAF, composite film as a replaceable hydrophobic dielectric layer for fabrication of a high-efficiency and stable EWOD-DMF device at relatively low voltage. The results show that the proposed EWOD devices using the PIGAF-based dielectric layer can achieve a large contact angle (θ) change of ∼50° and excellent reversibility with a contact angle hysteresis of ≤5° at a relatively low voltage of 30 Vrms. More importantly, the EWOD actuation voltage did not change obviously with the PIGAF film thickness in the range of several to tens of microns, enabling the thickness of the film to be adjusted according to the demand within a certain range while keeping the actuation voltage low. An EWOD-DMF device can be prepared by simply stacking a PIGAF film onto a PCB board, demonstrating stable droplet actuation (motion) at 30 Vrms and 1 kHz as well as a maximum moving velocity of 69 mm/s at 140 Vrms and 1 kHz. The PIGAF film was highly stable and reliable, maintaining excellent EWOD performance after multiple droplet manipulations (≥50 cycles) or long-term storage of 1 year. The proposed EWOD-DMF device has been demonstrated for digital chemical reactions and biomedical sensing applications.

Recoverable Electrowetting-On-Dielectric Device in Chemiluminescence Enzymatic Detector

Teflon wetting and dewetting on EWOD device for chemiluminescence detector

Chemiluminescence Detector Based On A Single Planar Transparent Digital Microfluidic Device

Reliability of a Compact and Portable Chemiluminescence Detector

A Microfluidic Chip Capable of Switching W/O Droplets to Vertical Laminar Flow for Electrochemical Detection of Droplet Contents.

Plasma-enhanced Electrowetting-on-dielectrics

Conductive and self-healing hydrogel for flexible electrochemiluminescence sensor

Biocompatible/Biodegradable Electrowetting On Dielectric Microfluidic Chips With Fluorinated Cta/Plga

Replaceable Dielectric Film for Low-Voltage and High-Performance Electrowetting-Based Digital Microfluidics

Superhydrophobic ZnO for EWOD Digital Microfluidic Device for Application in Micro Total Analysis System (Μ-Tas)

Electrowetting-on-dielectric Powered by Triboelectric Nanogenerator

Actuation and Control of Droplets by Using Electrowetting-on-Dielectric

Design of an Open Electrowetting on Dielectric Device Based on Printed Circuit Board by Using a Parafilm M

Designable Electrochemiluminescence Patterning for Renewable and Enhanced Bioimaging

Direct ink writing of fluoropolymer/CNT-based superhydrophobic and corrosion-resistant electrodes for droplet energy harvesters and self-powered electronic skins

Performance Improvement of ZnO Nanowire Based Surface Acoustic Wave Ultraviolet Detector Via Poly(3,4-Ethylenedioxythiophene) Surface Coating

Evaluation of Cyanoethyl Pullulan material as the dielectric layer for EWOD devices

Facile Low-Voltage Electrowetting on Dielectrics Using CYTOP™ As Both the Hydrophobic and Insulating Layer

Droplet Morphology Correction in Single-planar EWOD Devices to Enhance Luminescence Detection Sensitivity

The dual-detection mode and improved photoresponse of IGZO-based photodetectors by interfacing with water-soluble biomaterials

An immunoassay chip based on electrowetting on dielectrics