Abstract:PDMS suspensions with diverse droplet sizes are synthesized and used as building blocks for surface nano/micro‐scale topology formation. By judiciously facilitating fast crosslinking of PDMS, self‐roughed neat PDMS coating is created on warm substrates via a universal spray‐coating process, which displays both superhydrophobic and transparent properties, achieving large water contact angle (155.4°) with well‐maintained transparency (T550 = 82.3%). Polydimethylsiloxane (PDMS)‐based transparent and superhydrophobic coatings have important applications, such as anti‐icing, corrosion resistance, self‐cleaning, etc. However, their applications are limited by the inevitable introduction of nanoparticles/high‐temperature/segmented PDMS to facilitate a raspy surface. In this study, a self‐roughed, neat PDMS superhydrophobic coating with high transparency is developed via a one‐step spray‐coating technique. PDMS suspensions with various droplet sizes are synthesized and used as building blocks for raspy surface formation by controlled curing on the warm substrate. The optimal coating exhibits a large water contact angle of 155.4° and transparency (T550 = 82.3%). Meanwhile, the employed spray‐coating technique is applicable to modify a plethora of substrates. For proof‐of‐concept demonstrations, the use of the PDMS hydrophobic coating for anti‐liquid‐interference electrothermal devices and further transparent observation window for long‐term operation in a sub‐zero environment is shown successful. The proposed facile synthesis method of hydrophobic PDMS coating is expected to have great potential for a broad range of applications in the large‐scale fabrication of fluorine‐free, eco‐friendly superhydrophobic surfaces.

Teflon wetting and dewetting on EWOD device for chemiluminescence detector

Recoverable Electrowetting-On-Dielectric Device in Chemiluminescence Enzymatic Detector

Chemiluminescence Detector Based On A Single Planar Transparent Digital Microfluidic Device

Superhydrophobic ZnO for EWOD Digital Microfluidic Device for Application in Micro Total Analysis System (Μ-Tas)

Plasma-enhanced Electrowetting-on-dielectrics

Actuation and Control of Droplets by Using Electrowetting-on-Dielectric

Biocompatible/Biodegradable Electrowetting On Dielectric Microfluidic Chips With Fluorinated Cta/Plga

Electrowetting-on-dielectric Powered by Triboelectric Nanogenerator

Electrochemical detection of droplet contents in polystyrene microfluidic chip with integrated micro film electrodes

Nonporous water-proof coatings with resistance to harsh water environments and spontaneous dewetting

Ultrafast Laser Micro-Nano Structured Superhydrophobic Teflon Surfaces for Enhanced SERS Detection Via Evaporation Concentration

Facile Low-Voltage Electrowetting on Dielectrics Using CYTOP™ As Both the Hydrophobic and Insulating Layer

A Single-Side Coplanar Electrode Array EWOD Digital Microfluidics

Fast‐Crosslinking Enabled Self‐Roughed Polydimethylsiloxane Transparent Superhydrophobic Coating and Its Application in Anti‐Liquid‐Interference Electrothermal Device

EWOD using P(VDF-TrFE)

One-Step Fabrication of Non-Fluorinated Transparent Super Repellent Surfaces with Tunable Wettability Functioning in Both Air and Oil

Suppressing the Leidenfrost effect by air discharge assisted electrowetting-on-dielectrics

Electrowetting of the Blood Droplet on the Hydrophobic Film of the EWOD Chips

Regulating droplet impact on a solid hydrophobic surface through alternating current electrowetting-on-dielectric

Capillary electrophoresis coupled with electrochemiluminescence detection using porous etched joint.

Evaluation of Cyanoethyl Pullulan material as the dielectric layer for EWOD devices