Abstract:The use of instrumented indentation to measure the mechanical properties of thin films supported on substrates where the Young's modulus of the film (E1) is substantially less than that of the Young's modulus of the substrate (E2) with modulus ratios from E1/E2 = 0.0001 to 1 is important for investigating materials such as soft polymers, cellulosic sheets, and biological materials. Most existing models for determining the elastic properties of films or sheets on substrates from indentation measurements were developed for the analysis of metal and dielectric films on semiconductor substrates and thus have been used in cases where E1/E2 is ~0.01 to ~10. In the present work, flat punch indentation of systems with E1/E2 = 0.0001 to 1 is investigated via finite element (FE) modeling and experiments. A FE parametric study in which E1/E2 was varied from 0.0001 to 1 was performed to quantify the effect of substrate stiffness on the measurement of the elastic film properties. A semi-analytical model that treats the thin film and substrate as two springs in series was fit to the FE results to allow for use of the results presented. Preliminary experiments, in which a series of film/substrate systems with various modulus mismatch (E1/E2 from ~0.0005 to ~1) were characterized using instrumented indentation, were performed to evaluate the effectiveness of the model for extracting films properties from indentation measurements. The results of the parametric FE study show that for very stiff substrates, the measured stiffness becomes insensitive to changes in substrate modulus. The analytical model and FE model agree to within 7% for E1/E2 values between 0.0001 to 1 and a/t ratios from 1 to 100. Comparison of the preliminary experimental results and FE model show reasonable agreement, but further investigation is required to obtain better correlation.

Estimation of Elastic-Constants, Mass Density and Thickness of Thin-Films from Saw Velocity Dispersion

A New Method for Determination of the Optical Constants and Thickness of Thin Film

Determination of the optical constants of polymer light-emitting diode films from single reflection measurements

Single-Scan Method For Determination Of The Thickness And Optical Constant Of Thin Metal Film

Measurement of Young'S Modulus and Volumetric Mass Density/Thickness of Ultrathin Films Utilizing Resonant Based Mass Sensors

Thickness Estimation of the Si Thin Films: a Simulation Study

Simultaneous Determination of the Elastic Modulus and Density/thickness of Ultrathin Films Utilizing Micro-/Nanoresonators under Applied Axial Force

The Research of a Method to Obtain the Optical Parameters of Semiconductor Films

Characterizations of Elastic Constants of Transparent Thin Films Deposited on Substrates by Laser Ultrasonic Method

Determining the Elastic Modulus of Thin Films Using a Buckling-Based Method: Computational Study

Elastic Property Characterization of Soft Substrate-Supported Thin Films Using Multiscale Digital Image Correlation

Reference-free evaluation of thin films mass thickness and composition through energy dispersive X-ray spectroscopy

Study of thickness dependent density in ultrathin water soluble polymer films

A PRECISE AND SIMPLE METHOD, THE RELATIVE TRANSMISSION FRINGE DEPTH METHOD, OF DETERMINING THE OPTICAL-CONSTANTS AND THICKNESS OF THIN SEMITRANSPARENT FILMS

A method to extract absorption coefficient of thin films from transmission spectra of the films on thick substrates

Simultaneous Determination of the Residual Stress, Elastic Modulus, Density and Thickness of Ultrathin Film Utilizing Vibrating Doubly Clamped Micro-/Nanobeams

Thickness and Optical Constant Determination of Hydrogenated Amorphous Silicon Thin Film from Transmittance Spectra of Ellipsometer

Monitoring near-surface depth profile of residual stress in weakly anisotropic media by Rayleigh-wave dispersion

Interference-Aided Spectrum-Fitting Method for Accurate Film Thickness Determination

Measuring the Elastic Modulus of Soft Thin Films on Substrates

Couple Stress-Based 3D Contact of Elastic Films