Abstract:Abstract TOPCon (tunnel oxide passivated contact) solar cell is the mainstream high‐efficiency crystalline silicon solar cell structure. However, the lack of efficient passivation contact mechanisms on the front surface restricts the electrical performance ability to improve further. Selective emitter (SE) technology, considered a potential solution, needs to be more mature. This work provides a unique thermal pre‐diffusion approach combined with laser treatment and post‐oxidation annealing to create SE structures in TOPCon solar cells. Times for the high‐temperature process are equivalent to those for a traditional homogenous emitter. The innovative thermal pre‐diffusion process created a unique boron doping profile, achieving a high surface concentration of nearly 1 × 10 20 cm −3 with a shallow junction depth of approximately 0.25 μm. Laser treatment further activated boron and facilitated its diffusion, influenced by the boron silicate glass layer and surface boron atoms. Adjustments were made to improve the pre‐diffusion recipe, including an additional boron deposition step, increasing non‐activated boron atoms. Introducing larger pyramidal microstructures also improved the junction depth and surface concentration in the heavily doped region. Compared to homogeneous emitters, the SE structures exhibited lower surface concentration in the lightly doped region, reducing the recombination current density in the passivation region J 0,pass values. The SE structures achieved higher junction depths, limiting metal atom diffusion and reducing the current recombination density in the metal contact region J 0,metal values. The contact resistivity between metal and silicon was also decreased. Overall, introducing SE structures resulted in a batch‐average efficiency improvement of 0.26%, reaching an average efficiency of 25.22% for TOPCon solar cells, and has industrial mass‐producible.

PC2D Simulation and Optimization of the Selective Emitter Solar Cells Fabricated by Screen Printing Phosphoric Paste Method

Tuning of the Contact Properties for High-Efficiency Si/PEDOT:PSS Heterojunction Solar Cells

Mass production of high efficiency selective emitter crystalline silicon solar cells employing phosphorus ink technology

Pathway towards 24% efficiency for fully screen-printed passivated emitter and rear contact solar cells

Study on selective emitter fabrication through an innovative pre‐diffusion process for enhanced efficiency in TOPCon solar cells

Optimization of Mono-Crystalline Silicon Solar Cell Devices Using PC1D Simulation

An In-Depth Analysis of the Silicon Solar Cell Key Parameters’ Optimal Magnitudes Using PC1D Simulations

Optimization of efficiency enhancement of TOPCon cells with boron selective emitter

Performance of Large Area n-TOPCon Solar Cells with Selective Poly-Si Based Passivating Contacts Prepared by PECVD Method

Passivated Emitter and Rear Cell Silicon Solar Cells with a Front Polysilicon Passivating Contacted Selective Emitter

Modeling the potential of screen printed front junction CZ silicon solar cell with tunnel oxide passivated back contact

Optimized Phosphorus Diffusion Process and Performance Improvement of C-Si Solar Cell by Eliminating SiP Precipitates in the Emitter

Design and Simulation for Minimizing Non-Radiative Recombination Losses in CsGeI2Br Perovskite Solar Cells

Numerical study of mono-crystalline silicon solar cells with passivated emitter and rear contact configuration for the efficiency beyond 24% based on mass production technology

Study of Black Silicon Wafer through Wet Chemical Etching for Parametric Optimization in Enhancing Solar Cell Performance by PC1D Numerical Simulation

Optimization of Controllable Factors in the Aluminum Silicon Eutectic Paste and Rear Silicon Nitride Mono-Passivation Layer of PERC Solar Cells

OPTIMUM DESIGN OF METAL ELECTRODES OF SILICON SOLAR CELL

Improving the efficiency of crystalline silicon solar cells by an intersected selective laser doping

Study and Development of Rear‐emitter Si Heterojunction Solar Cells and Application of Direct Copper Metallization

Investigation on Significant Efficiency Enhancement of Thin Crystalline Silicon Solar Cells

Study on the Front Contact Mechanism of Screen-Printed Multi-Crystalline Silicon Solar Cells