Abstract:A site-specific xenon plasma focused ion beam preparation technique for microcantilever samples (1-20 µm width and 1:10 aspect ratio) is presented. The novelty of the methodology is the use of a chunk lift-out onto a clean silicon wafer to facilitate easy access of a low-cost probe type indenter which provides bending force measurement. The lift-out method allows sufficient room for the indenter and a line of sight for the electron beam to enable displacement measurement. An electroplated nanotwinned copper (NTC) was cut to a 3 × 3 × 25 µm microbeam and in situ mechanically tested using the developed technique. It demonstrated measured values of Youngs modulus of 78.7 ± 11 GPa and flow stress of 0.80 ± 0.05 GPa, which is within the ranges reported in the literature. LAY DESCRIPTION: In this paper a site specific method is present for making particularly small mechanical tests samples, of the order of 100th the size of a human hair. These small samples can then be used to determine the mechanical properties of the bulk material. Copper with a nano twinned grain structure is used as a test medium. Ion milling was used to cut the sample to shape and a micro probe was used for mechanical testing. Ion milling can cut away very small volumes of material as it accelerates ions at the surface of the sample, atomically machining the sample. Micro probes are a cost-effective small-scale load measurement devices, however, they require a large area for accessing the sample. The indenter requirements are a problem when making you samples with ion milling as ion millers are best at making small cuts. Our aim was to design a cutting strategy which reduces the amount of cutting required while allowing samples to be fabricated anywhere on the sample. We used a chunk lift out technique to remove a piece of material which is then welded to a wafer of silicon this gives sufficient space around the sample for ion milling and testing. The additional space allowed easy access for the probe. A 3 × 3 × 10 µm micro cantilever beam was cut out from copper, this beam was then bent. The force from bending and distance bent was measured and converted into Youngs modulus which is a measure of flexibility. The modulus value measured was comparable to the values reported in other papers.

Improvement of Specimen Preparation Process for Bulge Test Using the Combination of XeF2 and Deep Reactive Ion Etching

Improvement of Specimen Preparation Process for Bulge Test Using the Combination of XeF<sub>2</sub>and Deep Reactive Ion Etching

Novel scanning electron microscope bulge test technique integrated with loading function.

Improvement Of Thin Film Tensile Testing Technology Using Process Integrated Specimen And Considering Its Out-Of-Plane Deformation

In-Plane Liftout and Push-to-Pull for In Situ Mechanical Testing of Irradiated Inconel X-750

Study of Local Stress Using Stress-Absorbing Si Diaphragm

A Novel Approach to Study Patterned Thin Film Local Stress for Microelectronics Application

Bulge Test at Nano-Scale: the Surface Effects

Magnetic and Electric Bulge-Test Instrument for the Determination of Coupling Mechanical Properties of Functional Free-Standing Films and Flexible Electronics

Current Status and Prospects of Bulge Experiments for Thin Film Behavior Testing

A Novel Micro Tensile Testing Instrument with Replaceable Testing Specimen by Parylene Passivation Technique

Full field and microregion deformation measurement of thin films using electronic speckle pattern interferometry and array microindentation marker method

Fabrication of a high aspect ratio thick silicon wafer mold and electroplating using flipchip bonding for MEMS applications

Method for measuring mechanical properties of MEMS thin film materials

Bulge deformation measurement and elastic modulus analysis of nanoporous alumina membrane using time sequence speckle pattern interferometry

In Situ and Real-Time Tensile Testing of Thin Films Using Double-Field-of-view Electronic Speckle Pattern Interferometry

Monotonic and fatigue testing of spring-bridged freestanding microbeams application for MEMS

The Defect Reduction of Via Opens by the Integration of Inter-Metal-Dielectric Film, Metal Hard Mask, and All-in-One Etch Processes

Focused ion beam preparation of microbeams for in situ mechanical analysis of electroplated nanotwinned copper with probe type indenters

Oxide Or Metal Interface Damage Improvement Of Deep Silicon Etch Process By Low Power Rf Of Low Frequency

The Mechanical Properties of Electroplated Cu Thin Films Measured by Means of the Bulge Test Technique