Abstract:Abstract Characterizing the elastic properties of soft materials through bulge testing relies on accurate measurement of deformation, which is experimentally challenging. To avoid measuring deformation, we propose a hydrodynamic bulge test for characterizing the material properties of thick, pre-stressed elastic sheets via their fluid–structure interaction with a steady viscous fluid flow. Specifically, the hydrodynamic bulge test relies on a pressure drop measurement across a rectangular microchannel with a deformable top wall. We develop a mathematical model using first-order shear deformation theory of plates with stretching and the lubrication approximation for the Newtonian fluid flow. Specifically, a relationship is derived between the imposed flowrate and the total pressure drop. Then, this relationship is inverted numerically to yield estimates of the Young’s modulus (given the Poisson ratio) if the pressure drop is measured (given the steady flowrate). Direct numerical simulations of two-way-coupled fluid–structure interaction are carried out in ansys to determine the cross-sectional membrane deformation and the hydrodynamic pressure distribution. Taking the simulations as “ground truth,” a hydrodynamic bulge test is performed using the simulation data to ascertain the accuracy and the validity of the proposed methodology for estimating material properties. An error propagation analysis is performed via Monte Carlo simulation to characterize the susceptibility of the hydrodynamic bulge test estimates to noise. We find that, while a hydrodynamic bulge test is less accurate in characterizing material properties, it is less susceptible to noise, in the input (measured) variable, than a hydrostatic bulge test.

Current Status and Prospects of Bulge Experiments for Thin Film Behavior Testing

Surface Effects on the Mechanical Behavior of Buckled Thin Film

Dynamic Behaviors of Controllably Buckled Thin Films

Characterization Method of Thick Films Using the Bulge Test Technique

Bulge Test at Nano-Scale: the Surface Effects

The Mechanical Properties of Electroplated Cu Thin Films Measured by Means of the Bulge Test Technique

Finite Deformation Mechanics In Buckled Thin Films On Compliant Supports

Novel scanning electron microscope bulge test technique integrated with loading function.

Current status of blister tests for adhesion of thin films to substrate

Magnetic and Electric Bulge-Test Instrument for the Determination of Coupling Mechanical Properties of Functional Free-Standing Films and Flexible Electronics

A Novel Approach to Study Patterned Thin Film Local Stress for Microelectronics Application

Improvement of Specimen Preparation Process for Bulge Test Using the Combination of XeF<sub>2</sub>and Deep Reactive Ion Etching

Inquire into the method of measuring elastic modulus of polymer and metal films in bulge test

Analytical Model for Tube Hydro-Bulging Test, Part I: Models for Stress Components and Bulging Zone Profile

A general and unified theory of the kinematic relationships in bulge tests

Improvement of Specimen Preparation Process for Bulge Test Using the Combination of XeF2 and Deep Reactive Ion Etching

Hydrodynamic Bulge Testing: Materials Characterization Without Measuring Deformation

A Novel Technique for Mechanical Characterization of Thin Elastomeric Membrane

Measurement of Elastic Modulus and Residual Stress of Diamond Thin Films

Study of mechanical-magnetic and electromagnetic properties of PZT/Ni film systems by a novel bulge technique

The Investigation of the Evaluation of Mechanical Properties of Thin Films by Microbridge Testing