Abstract:The influence of glycine, as a chelating agent, and triblock copolymer mixture of PPG-PEG-PPG and PEG1000, as a suppressor agent, on the deposition mechanisms of zinc and zinc-nickel alloys were studied by cyclic voltammetry (CV) and potentiometric electrochemical impedance spectroscopy (PEIS), using electrolyte solutions of chlorinated acid. Cyclic voltammetry measurements show that the composition of the electrolytic solution affects the voltammogram profiles. Complementary PEIS investigations allowed the electrodeposition mechanisms to be highlighted depending on the composition of the electrolytic solution. The electrodeposition of zinc, in the absence of additives, occurs in a single cathodic wave from the ZnCl 3 − species, whereas in the presence of glycine, a second more cathodic reduction wave is relative to the Zn(Gly) 2 2+ species. The presence of the PPG-PEG-PPG and PEG1000 triblock copolymer induces a clear inhibition of the zinc reduction. Nevertheless, the zinc electrodeposition follows a three-dimensional instantaneous nucleation. The zinc electroplating mechanism involves a capacitive semi-circle at high frequency and two inductive loops at medium and low frequencies assigned to two adsorbed intermediates onto the substrate whatever the electrolyte composition. The presence of the polymer mixture affects the zinc reduction by increasing the charge-transfer resistance and the adsorption phenomena on the substrate. The electrodeposition of zinc-nickel alloys reveals a single reduction wave, from ZnCl 3 − and Ni(Gly) 2+ species, and multiple anodic signals depending on the electrolytic composition, according to the presence of glycine to chelate the nickel species. The zinc-nickel electroplating was evidenced to be a multiple-step process with a three-dimensional instantaneous nucleation, including intermediate species adsorbed onto the substrate. The equivalent circuit proposed consists of two capacitive half-circles separated by an inductive loop for any electrolytic solution. However, the impedance spectra were affected by the presence of glycine by modifying the inductive loop reflecting the first adsorbed intermediate (Ni(I) ads ). The morphology of zinc and zinc-nickel, with a nickel content between 14 and 19 wt.%, is affected by the electrolyte composition, however with the same crystal lattice. The preferential orientation of the lattice was shown to depend on the additives present in the solution.

Effect of EDTA and NH 4 Cl additives on electrodeposition of Zn–Ni films from choline chloride-based ionic liquid

Effects Of Nh4f On Electroless Ni-P Plating Bath And Properties Of Coatings

Electrodeposition of zinc-nickel alloys from ethylene glycol-based electrolytes in presence of additives for corrosion protection

Influence of Electrodeposition Conditions on the Microstructure and Corrosion Resistance of Zn–Ni Alloy Coatings from a Deep Eutectic Solvent

Electrodeposition and characterization of Zn–Sn alloy coatings from a deep eutectic solvent based on choline chloride for corrosion protection

Effect of Additive Methyl Nicotinate on Electrochemical Behavior of Nickel–Copper Alloy Electrodeposition in ChCl-EG Deep Eutectic Solvents

The Performance of Zn-Ni Alloy Coating Electrodeposited from Stabilized Bath

Structure, Composition and Corrosion Resistance of Zn-Ni-P Alloys Electrodeposited from an Ionic Liquid Based on Choline Chloride

Electrodeposition of Ni from Choline Chloride/Ethylene Glycol Deep Eutectic Solvent and Pure Ethylene Glycol

The effects of additive agents on zinc and zinc-nickel alloys electrodeposited on steel substrates in acidic electrolytes

Electroplating Behavior of Zn-Ni Alloys in an Alkaline Electrolyte

Electroplating and Physicochemical Properties of Zinc–Nickel Alloy Coatings from Ammonium Oxalate Electrolytes

Eco-Friendly Electrodeposition of Al-Zn Alloy from AlCl3-Urea Deep Eutectic Solvent

Study on electrodeposition behaviour and corrosion resistance of nickel-copper alloy in ChCl-EG deep eutectic solvents

Electrodeposition, Structural, and Corrosion Properties of Cu Films from A Stable Deep Eutectics System with Additive of Ethylene Diamine

The effect of partial substitution of Ti with Zr, Cr or V in the Mg35Ti10Ni55 electrode alloy on its electrochemical performance

Effects of NH4F on the deposition rate and buffering capability of electroless Ni–P plating solution

Screening Ammonium‐Based Cationic Additives to Regulate Interfacial Chemistry for Aqueous Ultra‐Stable Zn Metal Anode

Nickel electrodeposition from deep eutectic solvents containing copper ions at a high temperature

Electrolyte additive enhances the electrochemical performance of Cu for rechargeable Cu//Zn batteries

Effects of processing technology on the electrochemical behavior and Zn deposition process of Al-Mn-Ca alloy cathodes in high Cl− ions ZnSO4 solutions