Abstract:Introduction: Magnetostrictive Fe-Ga alloys have garnered extensive attention owing to their excellent magnetic properties and acceptable biocompatibility. Nevertheless, the polycrystalline Fe-Ga alloys currently available tend to display random texture orientations, which constrain their magnetostrictive performance. Objectives: To regulate the texture orientation of Fe-Ga-NbC alloys and thereby enhancing magnetostriction. Methods: In this study, a processing route comprising laser powder bed fusion (LPBF) followed by secondary recrystallization annealing (800, 1000, and 1200 °C, respectively) was developed to prepare Fe-Ga-NbC alloys. Results: The results showed that the LPBF-ed (Fe81Ga19)99(NbC)1 alloys exhibited a high content of high energy grain boundaries (HEGBs) due to the repeated melting and solidification. In subsequent annealing process, the migration of HEGBs induced the rearrangement and recrystallization of grains, during which NbC was found to locate at the grain boundaries and influence the migration path of HEGBs via selective pinning, thereby resulting in a strong Goss texture. With the rise in annealing temperature, the content of Goss texture gradually increased from the initial 3.9 % to 71.3 % at 1200 °C, leading to enhanced magnetostriction, lower saturation magnetization and coercivity. Furthermore, in alternating magnetic fields, the alloys annealed at 1200 °C also exhibited higher magnetostriction than the LPBF-ed alloys. And a noteworthy grain coarsening was also observed after annealing, accompanied by a discernible inclination of magnetic domains towards strip domains. Additional, cell tests demonstrated that the prepared alloys had satisfactory biocompatibility and the ability to promote osteogenic differentiation. Conclusion: These findings indicated that the LPBF-ed and annealed Fe-Ga-NbC alloys might be a promising alternative as magnetostrictive-driven materials for biomedical applications.

Retaining the (001) Orientation from Initial Columnar Grains and Magnetostriction in Binary Fe-Ga Alloy Sheets

Sharp Goss Orientation and Large Magnetostriction in the Rolled Columnar-Grained Fe–Ga Alloys

Structural, Magnetic and Mechanical Properties of Oligocrystalline Ni-Mn-Ga Shape Memory Microwires

Intermediate Annealing of Warm-rolled Sheets and Its Influence on the Texture Evolution in the Rolled Columnar-grained Fe-Ga Alloys

Secondary Recrystallization Behavior in the Rolled Columnar-Grained Fe–Ga Alloys

Secondary recrystallization induced by composite precipitates in magnetostrictive Fe-Ga alloy thin sheet

Secondary recrystallization behavior in magnetostrictive Fe-Ga thin sheets induced by nano-sized composite precipitates

Inhibition Force of Precipitates for Promoting Abnormal Grain Growth in Magnetostrictive Fe83Ga17-(B,NbC) Alloy Sheets

Deformation mechanism, orientation evolution and mechanical properties of annealed cross-rolled Mg-Zn-Zr-Y-Gd sheet during tension

Rapid Secondary Recrystallization of the Goss Texture in Fe81Ga19 Sheets Using Nanosized NbC Particles

Dynamic precipitation and the resultant magnetostriction enhancement in [001]-oriented Fe-Ga alloys

The Early Stage Formation of Shear Orientations and the Stability of //ND Orientations During Hot Rolling in Electrical Steels

Synergistic effects of laser powder bed fusion and annealing on the texture-selective recrystallization of magnetostrictive Fe-Ga-NbC alloys for biomedical applications

Improved magnetostriction in cold-rolled and annealed Mn50Fe50 alloy

Goss Texture Evolution in a Grain-Oriented Fe-6.5wt%Si Steel Processed by Strip-Casting

Microstructure related disparity of the magnetostriction in the oriented directionally solidified Fe81Ga19 polycrystals

Origin of the {111}〈112〉 Cold Rolling Texture Development in a Soft Magnetic Fe-27%Co Alloy

Insights into the evolution of texture and mechanical properties during warm rolling and annealing of Mg–2Zn-0.5Ca alloy

Texture transition of shear bands in initially Goss–oriented grains in Fe–3 wt%Si alloy

Deformation Twinning Caused by Warm Rolling and Secondary Recrystallizaion in Twin-Roll Strip Casting Fe81ga19 Alloy

Microstructure and Magnetostrictive Performance of NbC-doped <100> Oriented Fe-Ga Alloys