Abstract:Optical modes control has been driven from vertical cavity surface emitting lasers (VCSELs) applications with multi-mode operation such as optical fiber communication or optical sensing. Optical gain materials coupling with optical resonators provides an effective way to tuning the optical mode of VCSELs. In this paper, a kind of novel circular-grating distributed feedback (CGDFB) nanoplasmonic laser is designed by using a special semiconductor nanorods array VCSEL coupled optically with a second-order distributed feedback (DFB) circular grating. In the device, the mode field is cooperatively controlled by the confinement of surface plasmon around the nanorod cavity and the spatial tuning with the DFB circular grating. By optimizing the design on the device comprehensively, the CGDFB nanoplasmonic laser exhibits the optimum lasing performance with a single-longitudinal mode peak at 511.2 nm with a side-mode suppression ratio of 45 dB. The 3 dB line-width is compressed to 1.98 p.m. at a driven current of four times of the threshold current of 124 mA. A six-fold rotational symmetric far-field mode corresponding to the third-order Laguerre Gaussian azimuth mode is produced by the DFB circular grating. This work paves a fundamental way for the mode engineering design of novel nanolaser in the technical applications of optical communication, sensing and integrated photonics.

A Multiple Phase-Shifted Distributed Feedback (dfb) Laser Fabricated by Nanoimprint Lithography

Sub-diffraction Optical Beam Lithography Based on a Center-Non-zero Depletion Laser

DFB LD Manufactured by Nanoimprint Lithography

An improved approach to fabricate distributed feedback laser based on nanoimprint lithography

Hybrid Integrated Narrow-Linewidth Semiconductor Lasers

DFB Gratings for Semiconductor Laser Diodes by Nanoimprint Lithography

Application Study of Nanoimprint to Fabricate DWDM DFB Laser

Four-Channel 1.55-Mu M Dfb Laser Array Monolithically Integrated With A 4x1 Multimode-Interference Combiner Based On Nanoimprint Lithography

Dwdm Dfb Ld Fabricated by Nanoimprint Process

Narrow Linewidth Distributed Feedback Lasers Utilizing Distributed Phase Shift

Direct Laser Writing Breaking Diffraction Barrier Based on Two-Focus Parallel Peripheral-Photoinhibition Lithography

Study of key processes in the fabrication of high quality diffraction gratings by nanoimprint lithography

Fabrication of Four-Channel DFB Laser Array Using Nanoimprint Technology for 1.3 Μm CWDM Systems

Focused Ion Beam Lithography of Multiperiod Gratings for A Wavelength-Division-Multiplexed Transmitter Laser Array

Experimental Demonstration of Monolithically Integrated 16 Channel Dfb Laser Array Fabricated by Nanoimprint Lithography with Awg Multiplexer and Soa for Wdm-Pon Application

Linewidth Compression of DFB Laser with a High Ratio Based on SIL and PDH

Improved optical performance in circular-grating distributed feedback nanoplasmonic lasers

Single-mode and Wavelength Tunable Lasers Based on Deep-Submicron Slots Fabricated by Standard UV-lithography

Multi-Wavelength DFB Laser Based on Sidewall Third Order Four Phase-Shifted Sampled Bragg Grating with Uniform Wavelength Spacing

Experimental Demonstration of a 16-Channel DFB Laser Array Based on Nanoimprint Technology

High Quality Bragg Gratings Fabricated by Nanoimprint Lithography