Abstract:The distributed feedback laser (DFB) is a typical laser diode where the active region of the device is periodically structured as a diffraction grating. The output of a DFB laser has one single longitudinal mode and a relatively narrow line-width, usually several megahertz or one order less. However, applications such as coherent optical communication and accurate fiber sensing demand an even narrower line-width. An effective method for compressing a DFB laser is demonstrated. The line-width of a DFB laser, 200 KHz detected originally, is suppressed to sub kilohertz by adding an external parallel feedback cavity. The DFB laser is normatively designed but without the output isolator. The parallel feedback cavity is constructed by inserting several pieces of multimode fiber into a standard linear single-mode fiber cavity. In multimode fiber, each transverse mode has a different propagation constant. Equivalently, when a light beam propagates from single mode fiber to multimode fiber, it will split into a few parallel light paths with different propagation constants. The external cavity and DFB cavity form a compound resonant cavity for light beams. Lasing light in the compound cavity must fit the restrictions of all light paths, thus line-width of the final output is suppressed. When a passive external cavity is used, the line-width is suppressed to 1.25 KHz, detected by a delayed self-heterodyne interferometer with a 100km fiber delay line. By adding an erbium doped fiber amplifier (EDFA) into the external cavity for loss compensation, the result is updated to 430 Hz. This line-width suppressing method can be applied for other types of fiber lasers in a similar way. The parallel feedback mechanism is also suggested for general laser cavity designing to achieve ultra narrow line-width light source.

Linewidth Compression of DFB Laser with a High Ratio Based on SIL and PDH

Hybrid Integrated Narrow-Linewidth Semiconductor Lasers

Reduction of the Linewidth of a Diode Laser by Locking to a High-Finesse Fabry–Perot Cavity

Narrow Linewidth Semiconductor Laser Diodes

Line-Width Compression Of The Distributed Feedback Laser With An External Parallel Feedback Cavity

Narrow Linewidth Distributed Feedback Lasers Utilizing Distributed Phase Shift

Narrow-linewidth 852-nm DBR-LD with self-injection lock based on high-fineness optical cavity filtering

Narrow-Linewidth 852-Nm DBR-LD with Self-Injection Lock Based on High-Finesse Optical Cavity Filtering

Hertz-linewidth Hybrid Integrated Laser Based on High-Q Si3N4 Microring Reflectors

Optical and RIN Spectrum Improvements in Necked Waveguide High-Power DFB Laser Diode

Novel Linewidth Narrowing Scheme of Dfb Lasers Based on Integrated Mutual Injection Locking

Compact sub-Hz Linewidth Laser Enabled by Self Injection Lock To a Sub-mL FP Cavity

Simultaneous Linewidth Narrowing for Integrated Chip of DFB Laser Array Based on Self-Injection Feedback

A Compact Self-Injection-Locked Narrow-Linewidth Diode Laser with Narrowband Dielectric Filter

Sub-kHz Linewidth Fiber Laser via Weak Fiber Bragg Grating Enabled Self-Injection Locking

Sinlge-frequency fiber laser with tunable linewidth by optical self-injection

Narrow-linewidth Self-Injection Locked Diode Laser with a High-Q Fiber Fabry-Perot Resonator

Hybrid Integrated Modulation Bandwidth Enhanced Laser Based on Self-Injection Locking to an External High-Q Microring Reflector

30-Ghz Directly Modulation DFB Laser with Narrow Linewidth

Widely Tunable Distributed Feedback Semiconductor Lasers with Constant Power and Narrow Linewidth

Hybrid integrated self-injection locked narrow linewidth laser based on feedback tunable silicon nitride micro-ring resonator