Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Application Study of Nanoimprint to Fabricate DWDM DFB Laser

High Throughput Laser Nano Direct Writing Technique

Sub-diffraction Optical Beam Lithography Based on a Center-Non-zero Depletion Laser

3D nanoprinting for fiber-integrated achromatic diffractive lens

Peripheral-photoinhibition-based Direct Laser Writing with Isotropic 30 Nm Feature Size Using a Pseudo 3D Hollow Focus

Monolithic Integration of a High-Quality Factor Lithium Niobate Microresonator with a Free-Standing Membrane Waveguide Using Femtosecond Laser Assisted Ion Beam Writing (FLAIBW)

Direct Laser Writing Breaking Diffraction Barrier Based on Two-Focus Parallel Peripheral-Photoinhibition Lithography

Fabrication of High Precision Grating Patterns with a Compliant Nanomanipulator-Based Femtosecond Laser Direct Writing System

Single-mode and Wavelength Tunable Lasers Based on Deep-Submicron Slots Fabricated by Standard UV-lithography

Experimental Research on the Integrated Optical Injection-Locked DFB Laser Fabricated by the Reconstruction Equivalent Chirp Technique

Simulation and Grating Design of Dfb-Lds for Metropolitan Area and Access Networks and Their Characteristics

DESIGN AND SIMULATION FOR ETCHED DIFFRACTION GRATING FOR DWDM IN OPTICAL COMMUNICATION

Research Progress of Monolithic Integrated DFB Laser Arrays for Optical Communication

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Laser Nanofabrication: Applications in Micro-Optics, Micro-Electronics, Micromachines, and Microfluidics

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Nanostructures and Nanodevices Special Fabrication and Characterization

Performance Enhancement of Distributed Feedback Laser with a Partial Grating

1.3 Μm Laterally-Coupled Distributed Feedback Laser with a Triangular Prism Etched Facet

Low-cost lithography for fabrication of one-dimensional diffraction gratings by using laser diodes

Optical and RIN Spectrum Improvements in Necked Waveguide High-Power DFB Laser Diode