Abstract:Polymeric membrane materials containing ethylene oxide (EO) groups show promising applications in CO2 separation processes for clean energy supply and environmental remediation, but the fabrication of defect-free thin membrane possessing high CO2 permeance and CO2/gas selectivity is still a challenge. In this work, the thin film composite (TFC) membranes containing EO groups were developed by interfacial polymerization (IP) with trimesoyl chloride and commercial diamines named diethylene glycol bis(3-aminopropyl) ether (DGBAmE) and diaminopolyethylene glycol (DAmPEG). The TFC membranes prepared with DGBAmE and DAmPEG were named EO-3 and EO-21 according to the length of EO units, respectively. The structure and separation performance of membranes with short EO units and long EO units were compared, and the concentrations of monomers used in IP were adjusted to optimize the structure and separation performance of membranes. The results show that the structure and separation performance of EO-21 are hardly optimized by simply increasing the concentration of DAmPEG, because in IP process, the long EO units of DAmPEG not only decrease the diffusion rate of DAmPEG from aqueous phase to organic phase, but also hinder the diffusion of DAmPEG through the nascent film for further reaction, which results in the extremely low crosslinked density of EO-21 and the deterioration of gas selectivity at high feed pressure. In contrast, the structure and separation performance of EO-3 are conveniently adjusted by changing concentrations of monomers due to the much shorter EO units of DGBAmE which are beneficial for the diffusion and reaction of DGBAmE in IP process. EO-3 prepared with optimized monomer concentrations displays attractive CO2 permeance and CO2/gas selectivity, which shows promising applications in syngas and natural gas purification and flue gas CO2 capture.

Interfacially polymerized polyetheramine thin film composite membranes with PDMS inter-layer for CO2 separation

Interfacially Polymerized Composite Hollow Fiber Membrane for CO2 Separation

Interfacially polymerized thin film composite membranes containing ethylene oxide groups for CO2 separation

Fabrication of Polydimethysiloxane (PDMS) Dense Layer on Polyetherimide (PEI) Hollow Fiber Support for the Efficient CO2/N2 Separation Membranes

Selective Permeation of CO2 Through a Composite Membrane with a Separation Layer of 2-N,n-dimethyl Aminoethyl Methacrylate and Acrylic Acid Copolymer

Formation–structure–performance Correlation of Thin Film Composite Membranes Prepared by Interfacial Polymerization for Gas Separation

Constructing Thin and Cross-Linked Polyimide Membranes by Interfacial Reaction for Efficient CO 2 Separation

Pebax®/TSIL blend thin film composite membranes for CO2 separation

Pebax®/TSIL Blend Thin Film Composite Membranes for CO 2 Separation

Interfacial Polymerization of COF-polyamide Composite Membranes Modified with Ionic Liquids for CO2 Separations

Covalent organic frameworks-incorporated thin film composite membranes prepared by interfacial polymerization for efficient CO2 separation

Novel tertiary amino containing thin film composite membranes prepared by interfacial polymerization for CO2 capture

Effects of Preparation Parameters on CO2/N-2 Gas Permselectivity of Polyether Thin Film Composite Membrane

Aminated Substrate Based Thin Film Composite Nanofiltration Membrane with High Separation Performance by Chemically Inhibiting the Intrusion of Polyamide

Preparation of Hollow Fiber Poly(n,n-Dimethylaminoethyl Methacrylate)–poly(ethylene Glycol Methyl Ether Methyl Acrylate)/polysulfone Composite Membranes for CO2/N2 Separation

Thin-film Composite Membranes Based on Hyperbranched Poly(ethylene Oxide) for CO2/N2 Separation

High Performance Membranes Containing Rigid Contortion Units Prepared by Interfacial Polymerization for CO2 Separation

Poly(ethylene oxide)-Based Copolymer-IL Composite Membranes for CO2 Separation

Interfacial polymerization of COF-polyamide composite membranes modified with ionic liquids for CO 2 separations

Fabrication of polyarylate thin-film nanocomposite membrane based on graphene quantum dots interlayer for enhanced gas separation performance

High Solvent Resistance PTFPMS/PEI Hollow Fiber Composite Membrane for Gas Separation