Abstract:Among the available membranes, dense polymer composite hollow-fiber membranes are promising for gas permeation applications coupled with the use of gas/liquid contactors, but they are also used in other membrane processes such as pervaporation. This study focuses on a coating process, starting from a polymer solution, to control the thickness and regularity of the coated polymer. The thickness of the liquid film coated onto a fiber is related to the coating velocity, the physical and chemical properties of the liquid, and the coating geometry. Depending on the dominating forces, several regimes are defined: two unstable regimes, in which a thin and regular polymer layer cannot be produced, and two stable regimes, which are of interest for reaching our objectives at the laboratory or industrial scale. The theoretical laws were compared to experimental coatings with solutions of poly(trimethylsilyl)propyne (PTMSP) dissolved in cyclohexane coated onto poly(ether sulfone) (PES) hollow fibers. The viscosities, surface tensions, and densities of the solutions used were measured. The experimental thicknesses of coated polymer layers were compared to values calculated from Landau’s law, which describes the thickness behavior in the viscocapillary regime. The results showed good behavior agreement, but the experimental thickness was underestimated by the calculations. Four different kinds of composite membranes were prepared using two different porous supports (MicroPES and Oxyphan) and two different permeable polymers (PTMSP and Teflon AF2400) for coating. The obtained composites hollow fibers were characterized. All four presented low-energy surfaces with no wetting phenomena. They also exhibited high CO2 and N2 permeabilities with CO2/N2 selectivities between 3.4 and 2.5. The mechanical properties of the composites remained stable except for composites based on PES affected by the drying step during the coating process.

High Solvent Resistance PTFPMS/PEI Hollow Fiber Composite Membrane for Gas Separation

Molecular‐Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by in Situ Polymerization

The Effects of PEI Hollow Fiber Substrate Characteristics on PDMS/PEI Hollow Fiber Membranes for CO2/N2 Separation

Fabrication of Polydimethysiloxane (PDMS) Dense Layer on Polyetherimide (PEI) Hollow Fiber Support for the Efficient CO2/N2 Separation Membranes

Selective Permeation of CO2 Through a Composite Membrane with a Separation Layer of 2-N,n-dimethyl Aminoethyl Methacrylate and Acrylic Acid Copolymer

Pervaporation Performance of Polydimethylsiloxane/polyetherimide Composite Membrane for Separation of Thiophene/heptane Mixture(ⅰ) Effect of PDMS/PVDF Membrane Preparation Condition

Improving gas permeation performance of PDMS by incorporating hollow polyimide nanoparticles with microporous shells and preparing defect-free composite membranes for gas separation

Pervaporation Performance of Polydimethylsiloxane Membranes for Separation of Benzene/cyclohexane Mixtures

Preparation and gas separation properties of PDMS composite membrane materials

Carbon molecular sieve hollow fiber composite membrane derived from PMDA-ODA polyimide for gas separation

Engineered pinhole-stitching process of PEI-based hollow fiber membrane enables preferred performance toward light gas separation

Liquid–liquid interface induced PDMS‐PTFE composite membrane for ethanol perm‐selective pervaporation

Hollow-Fiber Coating: Application to Preparation of Composite Hollow-Fiber Membrane for Gas Separation

Performance Evaluation of PDMS or PEBAX-Coated Polyetherimide Membrane for Oxygen/Nitrogen Separation

Fabrication and Characterization of Poly(vinylidene Fluoride)–polytetrafluoroethylene Composite Membrane for CO2 Absorption in Gas–liquid Contacting Process

Preparation and Separation Performance of PDMS Composite Membranes for CO2 Separation from CO2-DMC System

Pervaporation Performance of Crosslinked Polydimethylsiloxane Membranes for Deep Desulfurization of Fcc Gasoline - I. Effect of Different Sulfur Species

Polyalkylmethylsiloxanes composite membranes for hydrocarbon/methane separation: Eight component mixed-gas permeation properties

Ionic liquid‐polymeric membranes for CO2 separation: A new perspective on membrane integrity under pressure

Separation of Sulfur/Gasoline Mixture with Polydimethylsiloxane/ Polyetherimide Composite Membranes by Pervaporation

PPMS Composite Membranes for the Concentration of Organics from Aqueous Solutions by Pervaporation